PartsTable
Technical Data Sheet
Download PDF

10088045 — WASHER,LOCK

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

10088045: WASHER,LOCK.

The WASHER,LOCK is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, hole_diameter: 0.141 INCHES MINIMUM AND 0.141 INCHES MINIMUM AND 0.148 INCHES MAXIMUM0.148 INCHES MAXIMUM IN, hardness_rating: 35.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM43.0 ROCKWELL C MAXIMUM, outside_diameter: 0.216 INCHES MAXIMUM0.216 INCHES MAXIMUM IN, style_designator: SPLIT HELICAL-RIGHT HAND, surface_treatment: PASSIVATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-042-7578, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10088045
NSN: 5310-01-042-7578
FSC: 5310 — Nuts and Washers
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
hole_diameter0.141 INCHES MINIMUM AND 0.141 INCHES MINIMUM AND 0.148 INCHES MAXIMUM0.148 INCHES MAXIMUM IN
hardness_rating35.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM43.0 ROCKWELL C MAXIMUM
outside_diameter0.216 INCHES MAXIMUM0.216 INCHES MAXIMUM IN
style_designatorSPLIT HELICAL-RIGHT HAND
surface_treatmentPASSIVATE OVERALL
material_thickness0.030 INCHES MINIMUM0.030 INCHES MINIMUM IN
nondefinitive_spec/std_dataC CLASS AND 5 STYLE
material_document_and_classification66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-042-7578
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 10088045 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
HARDNESS RATING: 35.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM43.0 ROCKWELL C MAXIMUM
•
STYLE DESIGNATOR: SPLIT HELICAL-RIGHT HAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 0.216 INCHES MAXIMUM0.216 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.030 INCHES MINIMUM0.030 INCHES MINIMUM IN
•
NONDEFINITIVE SPEC/STD DATA: C CLASS AND 5 STYLE
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 35.0 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM43.0 ROCKWELL C MAXIMUM
STYLE DESIGNATORSPLIT HELICAL-RIGHT HAND
MATERIAL DOCUMENT AND CLASSIFICATION66,300 SERIES FED STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER0.216 INCHES MAXIMUM0.216 INCHES MAXIMUM IN
MATERIAL THICKNESS0.030 INCHES MINIMUM0.030 INCHES MINIMUM IN
NONDEFINITIVE SPEC/STD DATAC CLASS AND 5 STYLE
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL CORROSION RESISTING OVERALL
HOLE DIAMETER0.141 INCHES MINIMUM AND 0.141 INCHES MINIMUM AND 0.148 INCHES MAXIMUM0.148 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES 4
780512-3Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
MS51848-47Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
FF-W-84Reference document
Same NSN cross-reference
Reference document — Identification reference
0740824Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10088045?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10088045?
10088045 is a WASHER,LOCK.
What parts can replace 10088045?
There are 4 known substitutes for 10088045: 780512-3, MS51848-47, FF-W-84 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10088045?
10088045 is cataloged in the U.S. Government catalog under NSN 5310-01-042-7578. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10088045

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.