PartsTable
Technical Data Sheet
PartsTable / MRO / 10087
10087 ✓ Verified by PartsTable
Disguise · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The RESISTOR,FIXED,WIRE WOUND is a Disguise industrial component. Key specifications include material: STEEL OVERALL, cone_width: 0.6550 INCHES NOMINAL IN, head_style: HEXAGON, point_type: CONVENTIONAL, body_length: 1.500 INCHES NOMINAL IN, head_height: 0.067 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0384, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10087
NSN: 3110-00-100-0384
FSC: 3110
CAGE: 89749 — CLARK MATERIAL HANDLING COMPANY (USA)
SPECIFICATIONS
materialSTEEL OVERALL
cone_width0.6550 INCHES NOMINAL IN
head_styleHEXAGON
point_typeCONVENTIONAL
body_length1.500 INCHES NOMINAL IN
head_height0.067 INCHES MINIMUM AND 0.080 INCHES MAXIMUM IN
point_angle118.0 DEGREES NOMINAL
shank_styleSTANDARD TAPER W/TANG
flute_length8.875 INCHES NOMINAL IN
thread_class2A A
body_diameter0.469 INCHES NOMINAL IN
bore_diameter0.7500 INCHES NOMINAL IN
NSN3110-00-100-0384
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10087 · Disguise ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BACKFACE CORNER RADIUS: 0.1250 INCHES NOMINAL IN
•
STANDARD TOLERANCE DESIGNATION: AFBMA CLASS 2
•
OUTSIDE DIAMETER: 3.9843 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NORMAL ANGLE
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
BACKFACE CORNER RADIUS0.1250 INCHES NOMINAL IN
OVERALL WIDTH1.3125 INCHES NOMINAL IN
STANDARD TOLERANCE DESIGNATIONAFBMA CLASS 2
OUTSIDE DIAMETER3.9843 INCHES NOMINAL IN
STYLE DESIGNATORNORMAL ANGLE
MATERIALSTEEL OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 25
280-1006P67Interchangeable
interchangeable cross-reference
interchangeable
522655Interchangeable
interchangeable cross-reference
interchangeable
MS35353-44Interchangeable
interchangeable cross-reference
interchangeable
SCD10560-10087Interchangeable
interchangeable cross-reference
interchangeable
10087Interchangeable
interchangeable cross-reference
interchangeable
534109-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10087?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10087?
10087 is a RESISTOR,FIXED,WIRE WOUND manufactured by Disguise. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10087?
There are 25 known substitutes for 10087: 280-1006P67, 522655, MS35353-44 and 22 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10087?
10087 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-100-0384. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10087

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026