PartsTable
Technical Data Sheet
Download PDF

10086874 — PLATE,MENDING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10086874: PLATE,MENDING.

The PLATE,MENDING is a the manufacturer industrial component. Key specifications include material: STEEL, overall_width: 3.190 INCHES NOMINAL IN, overall_length: 6.750 INCHES NOMINAL IN, style_designator: RECTANGULAR, material_thickness: 1.000 INCHES NOMINAL IN, mounting_hole_diameter: 0.655 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-225-6070, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10086874
NSN: 5340-01-225-6070
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL
hole_quantity3
overall_width3.190 INCHES NOMINAL IN
overall_length6.750 INCHES NOMINAL IN
style_designatorRECTANGULAR
material_thickness1.000 INCHES NOMINAL IN
mounting_hole_diameter0.655 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
material_document_and_classificationQQ-S-635 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-225-6070
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10086874 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-635 FED SPEC SINGLE MATERIAL RESPONSE
•
MOUNTING HOLE DIAMETER: 0.655 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 1.000 INCHES NOMINAL IN
•
MATERIAL: STEEL
•
HOLE QUANTITY: 3
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORRECTANGULAR
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-635 FED SPEC SINGLE MATERIAL RESPONSE
MOUNTING HOLE DIAMETER0.655 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
OVERALL LENGTH6.750 INCHES NOMINAL IN
OVERALL WIDTH3.190 INCHES NOMINAL IN
MATERIAL THICKNESS1.000 INCHES NOMINAL IN
MATERIALSTEEL
HOLE QUANTITY3
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10086874?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10086874?
10086874 is a PLATE,MENDING.
What is the NSN for 10086874?
10086874 is cataloged in the U.S. Government catalog under NSN 5340-01-225-6070. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10086874

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.