PartsTable
Technical Data Sheet
Download PDF

10086822 — CATCH,FLUSH

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10086822: CATCH,FLUSH.

The CATCH,FLUSH is a the manufacturer industrial component. Key specifications include width: 2.750 INCHES NOMINAL IN, length: 3.350 INCHES NOMINAL IN, material: UNABLE TO DECODE, style_designator: FLUSH LEVER ACTUATOR, features_provided: BOLT AND SPRING, bolt_offset_distance: 0.330 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-146-3450, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10086822
NSN: 5340-01-146-3450
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
width2.750 INCHES NOMINAL IN
length3.350 INCHES NOMINAL IN
materialUNABLE TO DECODE
style_designatorFLUSH LEVER ACTUATOR
features_providedBOLT AND SPRING
bolt_offset_distance0.330 INCHES NOMINAL IN
lever_offset_distance0.250 INCHES NOMINAL IN
mounting_hole_diameter0.221 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_width1.500 INCHES NOMINAL IN
center_to_center_distance_between_mounting_holes_along_length2.000 INCHES NOMINAL IN
NSN5340-01-146-3450
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10086822 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT OFFSET DISTANCE: 0.330 INCHES NOMINAL IN
•
LENGTH: 3.350 INCHES NOMINAL IN
•
LEVER OFFSET DISTANCE: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLUSH LEVER ACTUATOR
•
MOUNTING HOLE DIAMETER: 0.221 INCHES NOMINAL IN
•
FEATURES PROVIDED: BOLT AND SPRING
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH: 1.500 INCHES NOMINAL IN
•
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BOLT OFFSET DISTANCE0.330 INCHES NOMINAL IN
LENGTH3.350 INCHES NOMINAL IN
LEVER OFFSET DISTANCE0.250 INCHES NOMINAL IN
STYLE DESIGNATORFLUSH LEVER ACTUATOR
MOUNTING HOLE DIAMETER0.221 INCHES NOMINAL IN
FEATURES PROVIDEDBOLT AND SPRING
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH1.500 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH2.000 INCHES NOMINAL IN
WIDTH2.750 INCHES NOMINAL IN
MATERIALUNABLE TO DECODE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 3
H-5040K2147Reference document
Same NSN cross-reference
Reference document — Secondary reference
H5040K2147 ZZReference document
Same NSN cross-reference
Reference document — Secondary reference
13029942Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10086822?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10086822?
10086822 is a CATCH,FLUSH.
What parts can replace 10086822?
There are 3 known substitutes for 10086822: H-5040K2147, H5040K2147 ZZ, 13029942. Substitute compatibility should be verified for your specific system.
What is the NSN for 10086822?
10086822 is cataloged in the U.S. Government catalog under NSN 5340-01-146-3450. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10086822

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.