PartsTable
Technical Data Sheet
Download PDF

10086761 — HINGE,BUTT

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10086761: HINGE,BUTT.

The HINGE,BUTT is a the manufacturer industrial component. Key specifications include body_width: 2.750 INCHES NOMINAL IN, special_features: HINGE,BUTT,RIFLE, style_designator: BUTT, SINGLE ACTION, NON-ADJUSTABLE, EXPOSED SPRING, mounting_hole_diameter: 0.375 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN, pin_center_to_body_edge_distance: 1.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-114-7729, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10086761
NSN: 5340-01-114-7729
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
body_width2.750 INCHES NOMINAL IN
special_featuresHINGE,BUTT,RIFLE
style_designatorBUTT, SINGLE ACTION, NON-ADJUSTABLE, EXPOSED SPRING
mounting_hole_diameter0.375 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
pin_center_to_body_edge_distance1.125 INCHES NOMINAL IN
NSN5340-01-114-7729
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10086761 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BODY WIDTH: 2.750 INCHES NOMINAL IN
•
STYLE DESIGNATOR: BUTT, SINGLE ACTION, NON-ADJUSTABLE, EXPOSED SPRING
•
MOUNTING HOLE DIAMETER: 0.375 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
•
PIN CENTER TO BODY EDGE DISTANCE: 1.125 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
BODY WIDTH2.750 INCHES NOMINAL IN
STYLE DESIGNATORBUTT, SINGLE ACTION, NON-ADJUSTABLE, EXPOSED SPRING
MOUNTING HOLE DIAMETER0.375 INCHES MINIMUM AND 0.460 INCHES MAXIMUM IN
PIN CENTER TO BODY EDGE DISTANCE1.125 INCHES NOMINAL IN
SPECIAL FEATURESHINGE,BUTT,RIFLE
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10086761?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10086761?
10086761 is a HINGE,BUTT.
What is the NSN for 10086761?
10086761 is cataloged in the U.S. Government catalog under NSN 5340-01-114-7729. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10086761

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.