PartsTable
Technical Data Sheet
Download PDF

10086722 — PLATE,MENDING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10086722: PLATE,MENDING.

The PLATE,MENDING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1010, overall_width: 1.500 INCHES NOMINAL IN, overall_length: 6.500 INCHES NOMINAL IN, style_designator: RECTANGULAR, material_thickness: 0.048 INCHES NOMINAL IN, mounting_hole_diameter: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-109-5956, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10086722
NSN: 5340-01-109-5956
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL COMP 1010
hole_quantity6
overall_width1.500 INCHES NOMINAL IN
overall_length6.500 INCHES NOMINAL IN
style_designatorRECTANGULAR
material_thickness0.048 INCHES NOMINAL IN
mounting_hole_diameter0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
NSN5340-01-109-5956
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10086722 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RECTANGULAR
•
MOUNTING HOLE DIAMETER: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.048 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1010
•
HOLE QUANTITY: 6
TECHNICAL CHARACTERISTICS
STYLE DESIGNATORRECTANGULAR
MOUNTING HOLE DIAMETER0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
OVERALL LENGTH6.500 INCHES NOMINAL IN
OVERALL WIDTH1.500 INCHES NOMINAL IN
MATERIAL THICKNESS0.048 INCHES NOMINAL IN
MATERIALSTEEL COMP 1010
HOLE QUANTITY6
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
GS-3263Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10086722?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10086722?
10086722 is a PLATE,MENDING.
What parts can replace 10086722?
There is 1 known substitute for 10086722: GS-3263. Substitute compatibility should be verified for your specific system.
What is the NSN for 10086722?
10086722 is cataloged in the U.S. Government catalog under NSN 5340-01-109-5956. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10086722

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.