PartsTable
Technical Data Sheet
10086651 ✓ Verified by PartsTable
· ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

PLUG,PROTECTIVE,DUST AND MOISTUR. Key specifications include material: PLASTIC, POLYETHYLENE (PP), design_type: THREADED, thread_class: 3A A, overall_diameter: 0.875 INCHES NOMINAL IN, features_provided: SHOULDER, nondefinitive_spec/std_data: 3 TYPE AND 4 SIZE. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-597-9433, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10086651
NSN: 5340-00-597-9433
FSC: 5340
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialPLASTIC, POLYETHYLENE (PP)
design_typeTHREADED
thread_class3A A
overall_diameter0.875 INCHES NOMINAL IN
features_providedSHOULDER
nondefinitive_spec/std_data3 TYPE AND 4 SIZE
material_document_and_classificationL-P-390, TYPE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
thread_size_and_series/type_designator7/16-20 UNF
NSN5340-00-597-9433
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10086651 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
NONDEFINITIVE SPEC/STD DATA: 3 TYPE AND 4 SIZE
MATERIAL DOCUMENT AND CLASSIFICATION: L-P-390, TYPE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
DESIGN TYPE: THREADED
THREAD SIZE AND SERIES/TYPE DESIGNATOR: 7/16-20 UNF
OVERALL DIAMETER: 0.875 INCHES NOMINAL IN
FEATURES PROVIDED: SHOULDER
THREAD CLASS: 3A A
MATERIAL: PLASTIC, POLYETHYLENE (PP)
TECHNICAL CHARACTERISTICS (FLIS)
NONDEFINITIVE SPEC/STD DATA3 TYPE AND 4 SIZE
MATERIAL DOCUMENT AND CLASSIFICATIONL-P-390, TYPE 1, CLASS L FED SPEC SINGLE MATERIAL RESPONSE
DESIGN TYPETHREADED
THREAD SIZE AND SERIES/TYPE DESIGNATOR7/16-20 UNF
OVERALL DIAMETER0.875 INCHES NOMINAL IN
FEATURES PROVIDEDSHOULDER
THREAD CLASS3A A
MATERIALPLASTIC, POLYETHYLENE (PP)
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
M5501/1-R6Upgraded Successor
successor cross-reference
successor
MILC5501Upgraded Successor
successor cross-reference
successor
MIL-C-5501/1Upgraded Successor
successor cross-reference
successor
M5501/1-R8Upgraded Successor
successor cross-reference
successor
PD60Upgraded Successor
successor cross-reference
successor
25726009-04Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusCANCELLED
Availability
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10086651?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10086651?
10086651 is a PLUG,PROTECTIVE,DUST AND MOISTUR.
What parts can replace 10086651?
There are 22 known substitutes for 10086651: M5501/1-R6, MILC5501, MIL-C-5501/1 and 19 more. Substitute compatibility should be verified for your specific system.
Is 10086651 still available?
10086651 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10086651