PartsTable
Technical Data Sheet
Download PDF

10086495 — BUSHING,SLEEVE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10086495: BUSHING,SLEEVE.

The BUSHING,SLEEVE is a the manufacturer industrial component. Key specifications include material: CELLULOSE OVERALL, hole_diameter: 0.500 INCHES NOMINAL ALL HOLES IN, overall_width: 4.500 INCHES NOMINAL IN, overall_length: 4.500 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 3.250 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-110-4237, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10086495
NSN: 5330-01-110-4237
NIINs: 011104237, 016182086
FSC: 5330 — Packing and Gasket Materials
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialCELLULOSE OVERALL
hole_diameter0.500 INCHES NOMINAL ALL HOLES IN
overall_width4.500 INCHES NOMINAL IN
overall_length4.500 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter3.250 INCHES NOMINAL IN
bolt_hole_quantity4
outside_corner_radius0.500 INCHES NOMINAL IN
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
cross-sectional_thickness0.032 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationMIL-G-12803 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-110-4237
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10086495 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.032 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-12803 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 3.250 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.032 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-12803 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH4.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH4.500 INCHES NOMINAL IN
APERTURE DIAMETER3.250 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH3.500 INCHES NOMINAL ALL HOLES IN
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH3.500 INCHES NOMINAL ALL HOLES IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10086495?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10086495?
10086495 is a BUSHING,SLEEVE.
What is the NSN for 10086495?
10086495 is cataloged in the U.S. Government catalog under NSN 5330-01-110-4237. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10086495

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.