PartsTable
Technical Data Sheet
Download PDF

10086450 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10086450: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYCARBONATE OVERALL, hole_diameter: 0.220 INCHES MINIMUM ALL HOLES IN, overall_width: 2.250 INCHES NOMINAL IN, overall_length: 2.250 INCHES NOMINAL IN, style_designator: NON-CIRCULAR, aperture_diameter: 1.656 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-059-4286, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10086450
NSN: 5330-01-059-4286
NIINs: 010594286, 016219204
FSC: 5330 — Packing and Gasket Materials
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialPLASTIC POLYCARBONATE OVERALL
hole_diameter0.220 INCHES MINIMUM ALL HOLES IN
overall_width2.250 INCHES NOMINAL IN
overall_length2.250 INCHES NOMINAL IN
style_designatorNON-CIRCULAR
aperture_diameter1.656 INCHES NOMINAL IN
bolt_hole_quantity4
outside_corner_radius0.250 INCHES NOMINAL IN
end_item_identificationMRAP BUFFALO MK2A2, MRAP - M-ATV; 4210-01-622-0440; 2320-01-652-5218 JOINT LIGHT TACTICAL VEHICLE (JLTV); MRAP - COUGAR; ARMORED MULTI-PURPOSE VEHICLE (AMPV)
cross-sectional_thickness0.250 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
NSN5330-01-059-4286
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10086450 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.250 INCHES NOMINAL IN
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
APERTURE DIAMETER: 1.656 INCHES NOMINAL IN
•
BOLT HOLE QUANTITY: 4
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.250 INCHES NOMINAL IN
STYLE DESIGNATORNON-CIRCULAR
OVERALL LENGTH2.250 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH2.250 INCHES NOMINAL IN
APERTURE DIAMETER1.656 INCHES NOMINAL IN
BOLT HOLE QUANTITY4
END ITEM IDENTIFICATIONMRAP BUFFALO MK2A2, MRAP - M-ATV; 4210-01-622-0440; 2320-01-652-5218 JOINT LIGHT TACTICAL VEHICLE (JLTV); MRAP - COUGAR; ARMORED MULTI-PURPOSE VEHICLE (AMPV)
OUTSIDE CORNER RADIUS0.250 INCHES NOMINAL IN
MATERIALPLASTIC POLYCARBONATE OVERALL
SUBSTITUTES & CROSS-REFERENCES 1
3634233Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10086450?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10086450?
10086450 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 10086450?
There is 1 known substitute for 10086450: 3634233. Substitute compatibility should be verified for your specific system.
What is the NSN for 10086450?
10086450 is cataloged in the U.S. Government catalog under NSN 5330-01-059-4286. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10086450