PartsTable
Technical Data Sheet
Download PDF

10086411 — RING,RETAINING

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10086411: RING,RETAINING.

The RING,RETAINING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1065 OR STEEL COMP 1075 OR STEEL COMP 1085 OR STEEL COMP 1095, ring_style: SPECIAL, usage_design: INTERNAL, inside_diameter: 2.443 INCHES MINIMUM AND 2.495 INCHES MAXIMUM IN, major_thickness: 0.031 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN, outside_diameter: 2.749 INCHES MINIMUM AND 2.819 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5325-01-102-3533, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10086411
NSN: 5325-01-102-3533
FSC: 5325 — Fastening Devices
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL COMP 1065 OR STEEL COMP 1075 OR STEEL COMP 1085 OR STEEL COMP 1095
ring_styleSPECIAL
usage_designINTERNAL
inside_diameter2.443 INCHES MINIMUM AND 2.495 INCHES MAXIMUM IN
major_thickness0.031 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
outside_diameter2.749 INCHES MINIMUM AND 2.819 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE
casehardening_indicatorNOT CASEHARDENED
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE; A3 BRADLEY FIGHTING VEHICLE
material_hardness_rating60.4 ROCKWELL SUPERFICIAL 30-N MINIMUM AND 71.0 ROCKWELL SUPERFICIAL 30-N MAXIMUM
cross-sectional_shape_styleROUNDED CORNERS
material_document_and_classificationMIL-S-46049 MIL SPEC SINGLE MATERIAL RESPONSE
NSN5325-01-102-3533
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10086411 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL HARDNESS RATING: 60.4 ROCKWELL SUPERFICIAL 30-N MINIMUM AND 71.0 ROCKWELL SUPERFICIAL 30-N MAXIMUM
•
USAGE DESIGN: INTERNAL
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-46049 MIL SPEC SINGLE MATERIAL RESPONSE
•
CROSS-SECTIONAL SHAPE STYLE: ROUNDED CORNERS
•
OUTSIDE DIAMETER: 2.749 INCHES MINIMUM AND 2.819 INCHES MAXIMUM IN
•
MAJOR THICKNESS: 0.031 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
•
INSIDE DIAMETER: 2.443 INCHES MINIMUM AND 2.495 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
MATERIAL HARDNESS RATING60.4 ROCKWELL SUPERFICIAL 30-N MINIMUM AND 71.0 ROCKWELL SUPERFICIAL 30-N MAXIMUM
USAGE DESIGNINTERNAL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416, TYPE 2, CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-46049 MIL SPEC SINGLE MATERIAL RESPONSE
CROSS-SECTIONAL SHAPE STYLEROUNDED CORNERS
OUTSIDE DIAMETER2.749 INCHES MINIMUM AND 2.819 INCHES MAXIMUM IN
MAJOR THICKNESS0.031 INCHES MINIMUM AND 0.035 INCHES MAXIMUM IN
INSIDE DIAMETER2.443 INCHES MINIMUM AND 2.495 INCHES MAXIMUM IN
CASEHARDENING INDICATORNOT CASEHARDENED
RING STYLESPECIAL
SUBSTITUTES & CROSS-REFERENCES 2
12296766Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
12296766-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10086411?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10086411?
10086411 is a RING,RETAINING.
What parts can replace 10086411?
There are 2 known substitutes for 10086411: 12296766, 12296766-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 10086411?
10086411 is cataloged in the U.S. Government catalog under NSN 5325-01-102-3533. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10086411

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.