PartsTable
Technical Data Sheet
Download PDF

10085913 — BEARING,SLEEVE

✓ Government record, cited
— · BALL BEARING
PRODUCT OVERVIEW

10085913: BEARING,SLEEVE.

The BEARING,SLEEVE is a the manufacturer industrial component. Key specifications include corner_shape: SQUARE ALL CORNERS, overall_length: 2.2150 INCHES MINIMUM AND 2.2350 INCHES MAXIMUM IN, style_designator: SOLID, PLAIN, NO OUTSIDE FLANGES, body_inside_diameter: 4.2510 INCHES MINIMUM AND 4.2530 INCHES MAXIMUM IN, body_outside_diameter: 4.7530 INCHES MINIMUM AND 4.7550 INCHES MAXIMUM IN, end_item_identification: MULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE. This part is cataloged in the U.S.

Government catalog under NSN 3120-01-102-4699, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10085913
NSN: 3120-01-102-4699
FSC: 3120 — Bearings, Plain, Unmounted
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
corner_shapeSQUARE ALL CORNERS
overall_length2.2150 INCHES MINIMUM AND 2.2350 INCHES MAXIMUM IN
style_designatorSOLID, PLAIN, NO OUTSIDE FLANGES
body_inside_diameter4.2510 INCHES MINIMUM AND 4.2530 INCHES MAXIMUM IN
body_outside_diameter4.7530 INCHES MINIMUM AND 4.7550 INCHES MAXIMUM IN
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE
NSN3120-01-102-4699
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: 10085913 · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CORNER SHAPE: SQUARE ALL CORNERS
•
BODY OUTSIDE DIAMETER: 4.7530 INCHES MINIMUM AND 4.7550 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: SOLID, PLAIN, NO OUTSIDE FLANGES
•
BODY INSIDE DIAMETER: 4.2510 INCHES MINIMUM AND 4.2530 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
CORNER SHAPESQUARE ALL CORNERS
BODY OUTSIDE DIAMETER4.7530 INCHES MINIMUM AND 4.7550 INCHES MAXIMUM IN
STYLE DESIGNATORSOLID, PLAIN, NO OUTSIDE FLANGES
OVERALL LENGTH2.2150 INCHES MINIMUM AND 2.2350 INCHES MAXIMUM IN
BODY INSIDE DIAMETER4.2510 INCHES MINIMUM AND 4.2530 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONMULTIPLE LAUNCH ROCKET SYSTEM (MLRS); A4 BRADLEY FIGHTING VEHICLE
SUBSTITUTES & CROSS-REFERENCES 2
12296924Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
12296924-2Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 10085913?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10085913?
10085913 is a BEARING,SLEEVE.
What parts can replace 10085913?
There are 2 known substitutes for 10085913: 12296924, 12296924-2. Substitute compatibility should be verified for your specific system.
What is the NSN for 10085913?
10085913 is cataloged in the U.S. Government catalog under NSN 3120-01-102-4699. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10085913