PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10084577
10084577 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLATE,MENDING is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302, overall_width: 0.125 INCHES NOMINAL IN, overall_length: 0.544 INCHES NOMINAL IN, style_designator: RECTANGULAR, surface_treatment: PASSIVATE, material_thickness: 0.020 INCHES NOMINAL IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-138-0254, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10084577
NSN: 5340-00-138-0254
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 302
hole_quantity2
overall_width0.125 INCHES NOMINAL IN
overall_length0.544 INCHES NOMINAL IN
style_designatorRECTANGULAR
surface_treatmentPASSIVATE
material_thickness0.020 INCHES NOMINAL IN
mounting_hole_diameter0.068 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
NSN5340-00-138-0254
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10084577 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: STEEL COMP 302
•
SURFACE TREATMENT: PASSIVATE
•
HOLE QUANTITY: 2
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
•
STYLE DESIGNATOR: RECTANGULAR
•
MATERIAL THICKNESS: 0.020 INCHES NOMINAL IN
•
MOUNTING HOLE DIAMETER: 0.068 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MATERIALSTEEL COMP 302
SURFACE TREATMENTPASSIVATE
HOLE QUANTITY2
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
STYLE DESIGNATORRECTANGULAR
MATERIAL THICKNESS0.020 INCHES NOMINAL IN
OVERALL LENGTH0.544 INCHES NOMINAL IN
MOUNTING HOLE DIAMETER0.068 INCHES MINIMUM AND 0.072 INCHES MAXIMUM IN
OVERALL WIDTH0.125 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
132-022-0001Upgraded Successor
successor cross-reference
successor
CZ09609008Upgraded Successor
successor cross-reference
successor
H28Upgraded Successor
successor cross-reference
successor
851443Upgraded Successor
successor cross-reference
successor
52LH7611-5Interchangeable
interchangeable cross-reference
interchangeable
C396-5Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10084577?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10084577?
10084577 is a PLATE,MENDING.
What parts can replace 10084577?
There are 14 known substitutes for 10084577: 132-022-0001, CZ09609008, H28 and 11 more. Substitute compatibility should be verified for your specific system.
Is 10084577 still available?
10084577 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10084577

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026