PartsTable
Technical Data Sheet
Download PDF

10082383 — SCREW,CAP,HEXAGON HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10082383: SCREW,CAP,HEXAGON HEAD.

The SCREW,CAP,HEXAGON HEAD is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 1.500 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN, fastener_length: 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN, hardness_rating: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-082-6821, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10082383
NSN: 5305-00-082-6821
FSC: 5305 — Screws
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
head_styleHEXAGON
head_height0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM IN
thread_class2A A
thread_length1.500 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
fastener_length1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
hardness_rating32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
thread_directionRIGHT-HAND
surface_treatmentZINC AND CHROMATE OVERALL
width_between_flats1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
end_item_identificationMULTIPLE LAUNCH ROCKET SYSTEM (MLRS)
nominal_thread_diameter0.750 INCHES IN
minimum_tensile_strength150000 POUNDS PER SQUARE INCH LBS
NSN5305-00-082-6821
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10082383 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM IN
•
FASTENER LENGTH: 1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: ASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 1.500 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
•
HARDNESS RATING: 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE J429 ASSN STD ALL MATERIAL RESPONSES OVERALL
•
NOMINAL THREAD DIAMETER: 0.750 INCHES IN
•
HEAD STYLE: HEXAGON
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.455 INCHES MINIMUM AND 0.483 INCHES MAXIMUM IN
FASTENER LENGTH1.688 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONASTM B633 TY 2 SC 3 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH1.500 INCHES MINIMUM AND 1.750 INCHES MAXIMUM IN
HARDNESS RATING32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONSAE J429 ASSN STD ALL MATERIAL RESPONSES OVERALL
NOMINAL THREAD DIAMETER0.750 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS1.100 INCHES MINIMUM AND 1.125 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 6
ASME-B18.2.1Reference document
Same NSN cross-reference
Reference document — Secondary reference
FF-S-85Reference document
Same NSN cross-reference
Reference document — Identification reference
ASME B18.2.1AReference document
Same NSN cross-reference
Reference document — Secondary reference
B1821BH075F175NReference document
Same NSN cross-reference
Reference document — Secondary reference
18C1228Reference document
Same NSN cross-reference
Reference document — Secondary reference
MS90727-186Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 10082383?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10082383?
10082383 is a SCREW,CAP,HEXAGON HEAD.
What parts can replace 10082383?
There are 6 known substitutes for 10082383: ASME-B18.2.1, FF-S-85, ASME B18.2.1A and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10082383?
10082383 is cataloged in the U.S. Government catalog under NSN 5305-00-082-6821. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10082383

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.