PartsTable
Technical Data Sheet
PartsTable / MRO / 1008010
1008010 ✓ Verified by PartsTable
3M · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include material: STEEL OVERALL, body_style: CYLINDRICAL BUSHING MOUNTED, body_length: 0.705 INCHES NOMINAL IN, shaft_style: ROUND, shaft_length: 0.875 INCHES NOMINAL IN, actuator_type: SINGLE SHAFT. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-292-4795, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1008010
NSN: 5315-00-292-4795
FSC: 5315
CAGE: 10001 — NAVAIR AND NAVSEA MANAGED ORIGINAL DESIGN ACTIVITY DWG NOT MATERIAL/PARTS SUPPLIER (USA)
SPECIFICATIONS
materialSTEEL OVERALL
body_styleCYLINDRICAL BUSHING MOUNTED
body_length0.705 INCHES NOMINAL IN
shaft_styleROUND
shaft_length0.875 INCHES NOMINAL IN
actuator_typeSINGLE SHAFT
body_diameter1.312 INCHES NOMINAL IN
overall_width0.1245 INCHES MINIMUM AND 0.1255 INCHES MAXIMUM IN
overall_height0.1245 INCHES MINIMUM AND 0.1255 INCHES MAXIMUM IN
overall_length0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
shaft_diameter0.250 INCHES NOMINAL IN
mounting_methodSTANDARD BUSHING
NSN5315-00-292-4795
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1008010 · 3M ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT: PHOSPHATE ZINC OVERALL
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: PLAIN
•
STARTING EDGE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH0.609 INCHES MINIMUM AND 0.641 INCHES MAXIMUM IN
OVERALL WIDTH0.1245 INCHES MINIMUM AND 0.1255 INCHES MAXIMUM IN
SURFACE TREATMENTPHOSPHATE ZINC OVERALL
MATERIALSTEEL OVERALL
STYLE DESIGNATORPLAIN
STARTING EDGE SHAPESTRAIGHT
OVERALL HEIGHT0.1245 INCHES MINIMUM AND 0.1255 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
MS90376-22RInterchangeable
interchangeable cross-reference
interchangeable
XP89234400016Interchangeable
interchangeable cross-reference
interchangeable
FENNG621-1Interchangeable
interchangeable cross-reference
interchangeable
G128-244-001Interchangeable
interchangeable cross-reference
interchangeable
70210Interchangeable
interchangeable cross-reference
interchangeable
247ASC1918-001Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1008010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1008010?
1008010 is a RESISTOR,VARIABLE,WIRE WOUND,PRE manufactured by 3M. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1008010?
There are 14 known substitutes for 1008010: MS90376-22R, XP89234400016, FENNG621-1 and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1008010?
1008010 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-292-4795. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1008010

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026