PartsTable
Technical Data Sheet
Download PDF

1007SLR105S — BEARING,BALL,ANNULAR

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

1007SLR105S: BEARING,BALL,ANNULAR.

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL INNER RING, bore_shape: STRAIGHT, bore_diameter: 0.6250 INCHES MINIMUM AND 0.6254 INCHES MAXIMUM IN, load_direction: RADIAL, surface_finish: GROUND, inner_ring_width: 1.2763 INCHES MINIMUM AND 1.2813 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-516-5579, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1007SLR105S
NSN: 3110-00-516-5579
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 63504 — PALFINGER MARINE USA, LLC (USA)
SPECIFICATIONS
materialSTEEL INNER RING
bore_shapeSTRAIGHT
bore_diameter0.6250 INCHES MINIMUM AND 0.6254 INCHES MAXIMUM IN
seal_quantity2
load_directionRADIAL
surface_finishGROUND
inner_ring_width1.2763 INCHES MINIMUM AND 1.2813 INCHES MAXIMUM IN
outer_ring_width0.6250 INCHES NOMINAL IN
style_designatorSINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDED ONE SIDE, WITH SETSCREW IN INNER RING
bearing_seal_typeLABYRINTH
lubrication_materialGREASE
overall_outside_diameter1.8499 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
NSN3110-00-516-5579
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1007SLR105S · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BEARING SEAL TYPE: LABYRINTH
•
LUBRICATION MATERIAL: GREASE
•
OUTER RING WIDTH: 0.6250 INCHES NOMINAL IN
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: SINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDED ONE SIDE, WITH SETSCREW IN INNER RING
•
OVERALL OUTSIDE DIAMETER: 1.8499 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
•
BORE SHAPE: STRAIGHT
TECHNICAL CHARACTERISTICS
BEARING SEAL TYPELABYRINTH
LUBRICATION MATERIALGREASE
OUTER RING WIDTH0.6250 INCHES NOMINAL IN
INTERNAL FIT-UP DESIGNATIONSTANDARD
SURFACE FINISHGROUND
STYLE DESIGNATORSINGLE ROW BALL, NOT SELF-ALIGNING, INNER RING EXTENDED ONE SIDE, WITH SETSCREW IN INNER RING
OVERALL OUTSIDE DIAMETER1.8499 INCHES MINIMUM AND 1.8504 INCHES MAXIMUM IN
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
SEAL QUANTITY2
SUBSTITUTES & CROSS-REFERENCES 1
RB10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 1007SLR105S?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1007SLR105S?
1007SLR105S is a BEARING,BALL,ANNULAR.
What parts can replace 1007SLR105S?
There is 1 known substitute for 1007SLR105S: RB10. Substitute compatibility should be verified for your specific system.
What is the NSN for 1007SLR105S?
1007SLR105S is cataloged in the U.S. Government catalog under NSN 3110-00-516-5579. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1007SLR105S