PartsTable
Technical Data Sheet
Download PDF

10075513 — RETAINER,PACKING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10075513: RETAINER,PACKING.

The RETAINER,PACKING is a the manufacturer industrial component. Key specifications include angle: 30.0 DEGREES NOMINAL, material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, joint_type: SCARF-BUTT ONE SIDE, peripheral_diameter: 1.176 INCHES NOMINAL IN, center_hole_diameter: 1.000 INCHES NOMINAL IN, distance_between_ends: 0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-084-3528, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10075513
NSN: 5330-01-084-3528
FSC: 5330 — Packing and Gasket Materials
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
angle30.0 DEGREES NOMINAL
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
joint_typeSCARF-BUTT ONE SIDE
peripheral_diameter1.176 INCHES NOMINAL IN
center_hole_diameter1.000 INCHES NOMINAL IN
distance_between_ends0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
cross-sectional_height0.081 INCHES NOMINAL IN
cross-sectional_thickness0.027 INCHES NOMINAL IN
cross-sectional_shape_styleSQUARE
material_document_and_classificationAMS 3678/1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-084-3528
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10075513 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.027 INCHES NOMINAL IN
•
CROSS-SECTIONAL HEIGHT: 0.081 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 3678/1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE
•
ANGLE: 30.0 DEGREES NOMINAL
•
PERIPHERAL DIAMETER: 1.176 INCHES NOMINAL IN
•
DISTANCE BETWEEN ENDS: 0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
•
CENTER HOLE DIAMETER: 1.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.027 INCHES NOMINAL IN
CROSS-SECTIONAL HEIGHT0.081 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 3678/1 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CROSS-SECTIONAL SHAPE STYLESQUARE
ANGLE30.0 DEGREES NOMINAL
PERIPHERAL DIAMETER1.176 INCHES NOMINAL IN
DISTANCE BETWEEN ENDS0.047 INCHES MINIMUM AND 0.093 INCHES MAXIMUM IN
CENTER HOLE DIAMETER1.000 INCHES NOMINAL IN
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
JOINT TYPESCARF-BUTT ONE SIDE
SUBSTITUTES & CROSS-REFERENCES 3
RE0121774Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
S11109-120Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
5330PL0884906Reference document
Same NSN cross-reference
Reference document — Informative reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10075513?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10075513?
10075513 is a RETAINER,PACKING.
What parts can replace 10075513?
There are 3 known substitutes for 10075513: RE0121774, S11109-120, 5330PL0884906. Substitute compatibility should be verified for your specific system.
What is the NSN for 10075513?
10075513 is cataloged in the U.S. Government catalog under NSN 5330-01-084-3528. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10075513

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.