PartsTable
Technical Data Sheet
Download PDF

100752 — 100752

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

100752: 100752.

The 100752 is a the manufacturer industrial component. Key specifications include end_item_identification: MK1.5, MK2, MK2.5 SURVIVAL EGRESS AIR. This part is cataloged in the U.S.

Government catalog under NSN 5306-00-286-2511, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 100752
NSN: 5306-00-286-2511
NIINs: 002862511, 010998754, 014782291, 015382366
FSC: 5306 — Bolts
CAGE: 81580 — MCCULLOCH CORP (USA)
SPECIFICATIONS
special_featuresMOBILE; USES 2 CARBON FIBER COMPOSITE 4500 PSI CYLINDERS; 2 PRE-SET REGULATED 3000 PSI FILL LINES; CAN TOP OFF 150 SEA MK2.0 FROM 2800-3000 PSI
end_item_identificationMK1.5, MK2, MK2.5 SURVIVAL EGRESS AIR
NSN5306-00-286-2511
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 100752 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: 32.0 MICROINCHES THREADS
•
HEAD HEIGHT: 0.156 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.000 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
•
THREAD LENGTH: 0.625 INCHES MINIMUM IN
•
HARDNESS RATING: 26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
TECHNICAL CHARACTERISTICS
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH63.0 MICROINCHES GRIP
SURFACE FINISH63.0 MICROINCHES BEARING SURFACE OF HEAD
HEAD HEIGHT0.156 INCHES NOMINAL IN
FASTENER LENGTH1.000 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD LENGTH0.625 INCHES MINIMUM IN
HARDNESS RATING26.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.250 INCHES IN
SUBSTITUTES & CROSS-REFERENCES 2
5306PL1021742Reference document
Same NSN cross-reference
Reference document — Informative reference only
AN101114Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 100752?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100752?
100752 is a 100752. It is classified as a MRO (MRO_GENERAL).
What parts can replace 100752?
There are 2 known substitutes for 100752: 5306PL1021742, AN101114. Substitute compatibility should be verified for your specific system.
What is the NSN for 100752?
100752 is cataloged in the U.S. Government catalog under NSN 5306-00-286-2511. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100752

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.