PartsTable
Technical Data Sheet
Download PDF

10067993 — GEAR,SPUR

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10067993: GEAR,SPUR.

The GEAR,SPUR is a the manufacturer industrial component. Key specifications include material: STEEL UNS K24065 OVERALL, body_style: PLAIN, WITH LIGHTENING HOLES, bore_style: PLAIN BOTH ENDS, tooth_form: STANDARD, pitch_diameter: 3.7500 INCHES NOMINAL IN, pressure_angle: 20.0000 DEGREES. This part is cataloged in the U.S.

Government catalog under NSN 5331-00-166-0994, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10067993
NSN: 5331-00-166-0994
NIINs: 001660994, 009336983
FSC: 5331 — O-ring
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialSTEEL UNS K24065 OVERALL
body_stylePLAIN, WITH LIGHTENING HOLES
bore_stylePLAIN BOTH ENDS
tooth_formSTANDARD
pitch_diameter3.7500 INCHES NOMINAL IN
pressure_angle20.0000 DEGREES
teeth_quantity105
style_designatorPROTRUDING HUB
features_providedLUBRICATION GROOVE
face_nominal_width0.250 INCHES IN
hub_nominal_diameter1.378 INCHES FIRST END IN
hub_style_designatorPLAIN FIRST END
NSN5331-00-166-0994
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10067993 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.864 INCHES MINIMUM AND 0.894 INCHES MAXIMUM IN
•
HARDNESS RATING: 75.0 SHORE DUROMETER A NOMINAL
•
ELONGATION PERCENTAGE: 125 MAXIMUM
•
CENTER HOLE DIAMETER: 0.730 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN
•
MATERIAL: RUBBER FLUOROCARBON CLASS FPM
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.067 INCHES MINIMUM AND 0.073 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.864 INCHES MINIMUM AND 0.894 INCHES MAXIMUM IN
HARDNESS RATING75.0 SHORE DUROMETER A NOMINAL
ELONGATION PERCENTAGE125 MAXIMUM
CENTER HOLE DIAMETER0.730 INCHES MINIMUM AND 0.748 INCHES MAXIMUM IN
MATERIALRUBBER FLUOROCARBON CLASS FPM
SUBSTITUTES & CROSS-REFERENCES 8
M83248/1-018Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
ASC1442296Reference document
Same NSN cross-reference
Reference document — Secondary reference
F3C10272-5Reference document
Same NSN cross-reference
Reference document — Secondary reference
2-018 V747-75Reference document
Same NSN cross-reference
Reference document — Secondary reference
04018-514A0Reference document
Same NSN cross-reference
Reference document — Secondary reference
ST1946-018Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 10067993?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10067993?
10067993 is a GEAR,SPUR.
What parts can replace 10067993?
There are 8 known substitutes for 10067993: M83248/1-018, ASC1442296, F3C10272-5 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10067993?
10067993 is cataloged in the U.S. Government catalog under NSN 5331-00-166-0994. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10067993