PartsTable
Technical Data Sheet
Download PDF

1006708 — RESISTOR,VARIABLE,WIRE WOUND,PRE

✓ Government record, cited
3M · MRO · MRO_GENERAL
PRODUCT OVERVIEW

1006708: RESISTOR,VARIABLE,WIRE WOUND,PRE.

RESISTOR,VARIABLE,WIRE WOUND,PRE. Key specifications include body_style: CYLINDRICAL SERVO MOUNTED, body_length: 2.359 INCHES MAXIMUM IN, shaft_style: ROUND, bearing_type: BALL SHAFT, pilot_length: 0.0620 INCHES NOMINAL IN, shaft_length: 0.875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-00-660-4459, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1006708
NSN: 5905-00-660-4459
NIINs: 006604459, 006925256
FSC: 5905 — Resistor
CAGE: 56232 — LOCKHEED MARTIN CORPORATION DIV RMS - MITCHEL FIELD (USA)
SPECIFICATIONS
body_styleCYLINDRICAL SERVO MOUNTED
body_length2.359 INCHES MAXIMUM IN
shaft_styleROUND
bearing_typeBALL SHAFT
pilot_length0.0620 INCHES NOMINAL IN
shaft_length0.875 INCHES NOMINAL IN
shaft_runout0.001 INCHES IN
actuator_typeSINGLE SHAFT
body_diameter1.438 INCHES NOMINAL IN
document_typeENGINEERING DRAWING
end_item_nameTANK COMBAT FULL-TRACKED 900MM MM
lateral_runout0.002 INCHES IN
NSN5905-00-660-4459
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR MFR: 3M RESISTOR,VARIABLE,WIRE WOUND,PRE TITLE COMPONENT PN 1006708 MFR 3M RESISTOR,VARIABLE,WIRE
KEY FEATURES
•
MAXIMUM RUNNING TORQUE: 1.00 INCH-OUNCES IN
•
BODY DIAMETER: 1.438 INCHES NOMINAL IN
•
LATERAL RUNOUT: 0.002 INCHES IN
•
ELECTRICAL RESISTANCE PER SECTION: 10.000 KILOHMS ALL SECTIONS
•
MOUNTING LIP DEPTH: 0.0930 INCHES NOMINAL IN
•
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER: 85.0 ALL SECTIONS
•
UNDERCUT WIDTH: 0.0730 INCHES MINIMUM IN
•
SECTION QUANTITY: 2
TECHNICAL CHARACTERISTICS
MAXIMUM RUNNING TORQUE1.00 INCH-OUNCES IN
BODY DIAMETER1.438 INCHES NOMINAL IN
LATERAL RUNOUT0.002 INCHES IN
ELECTRICAL RESISTANCE PER SECTION10.000 KILOHMS ALL SECTIONS
MOUNTING LIP DEPTH0.0930 INCHES NOMINAL IN
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER85.0 ALL SECTIONS
UNDERCUT WIDTH0.0730 INCHES MINIMUM IN
SECTION QUANTITY2
SHAFT DIAMETER0.250 INCHES NOMINAL IN
UNDERCUT DIAMETER1.312 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES 3
1981272Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
14BIPG2Reference document
Same NSN cross-reference
Reference document — Secondary reference
55-150-032Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1006708?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1006708?
1006708 is a RESISTOR,VARIABLE,WIRE WOUND,PRE manufactured by 3M. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1006708?
There are 3 known substitutes for 1006708: 1981272, 14BIPG2, 55-150-032. Substitute compatibility should be verified for your specific system.
What is the NSN for 1006708?
1006708 is cataloged in the U.S. Government catalog under NSN 5905-00-660-4459. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1006708

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.