PartsTable
Technical Data Sheet
PartsTable / MRO / 1006-5
1006-5 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

FILTER,RADIO FREQUENCY INTERFERE. Key specifications include angle: 105.0 DEGREES, height: 1.188 INCHES NOMINAL IN, material: STEEL CASE, dial_size: 2 INCH DIA IN, bezel_type: CRIMP, bore_shape: STRAIGHT. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-6200, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1006-5
NSN: 3110-00-155-6200
FSC: 3110
CAGE: 05415 — LINDE LIFT TRUCK CORP. (USA)
SPECIFICATIONS
angle105.0 DEGREES
height1.188 INCHES NOMINAL IN
materialSTEEL CASE
dial_size2 INCH DIA IN
bezel_typeCRIMP
bore_shapeSTRAIGHT
head_styleFLAT COUNTERSUNK
point_typeCONVENTIONAL
scale_nameOIL PRESSURE
scale_typeARC
point_angle118.0 DEGREES NOMINAL
scale_range+0.0 TO 80.0 POUNDS PRESSURE PER SQUARE INCH LBS
NSN3110-00-155-6200
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 1006-5 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BORE SHAPE: STRAIGHT
•
LOAD DIRECTION: RADIAL
•
OVERALL OUTSIDE DIAMETER: 62.0 MILLIMETERS NOMINAL MM
•
MATERIAL: STEEL INNER RING
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
TECHNICAL CHARACTERISTICS (FLIS)
BORE SHAPESTRAIGHT
LOAD DIRECTIONRADIAL
OVERALL OUTSIDE DIAMETER62.0 MILLIMETERS NOMINAL MM
MATERIALSTEEL INNER RING
MATERIALSTEEL SHIELD
MATERIALSTEEL OUTER RING
MATERIALSTEEL BALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
SURFACE FINISHGROUND
STANDARD TOLERANCE DESIGNATIONABEC NO.1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 34
12910Interchangeable
interchangeable cross-reference
interchangeable
8A91001Interchangeable
interchangeable cross-reference
interchangeable
30023Interchangeable
interchangeable cross-reference
interchangeable
7506Interchangeable
interchangeable cross-reference
interchangeable
895Interchangeable
interchangeable cross-reference
interchangeable
8905Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1006-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1006-5?
1006-5 is a FILTER,RADIO FREQUENCY INTERFERE. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1006-5?
There are 34 known substitutes for 1006-5: 12910, 8A91001, 30023 and 31 more. Substitute compatibility should be verified for your specific system.
Is 1006-5 still available?
1006-5 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1006-5

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026