PartsTable
Technical Data Sheet
Download PDF

1006-1 — BLADE,BAND SAW,METAL CUTTING

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

1006-1: BLADE,BAND SAW,METAL CUTTING.

The BLADE,BAND SAW,METAL CUTTING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: HEXAGON, head_height: 0.195 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN, thread_class: 2A A, overall_width: 3.000 INCHES NOMINAL IN, thread_length: 0.875 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-064-4710, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1006-1
NSN: 5310-00-064-4710
NIINs: 000644710, 001566559, 002281346, 003448652, 003513059, 003746672, 008809601, 010257976, 010259834, 010352600, 011078271, 011277400, 013152342, 015167385, 015222671, 015649983, 015867728
FSC: 5310 — Nuts and Washers
CAGE: A0640 — LABROMEC SRL (ITA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleHEXAGON
head_height0.195 INCHES MINIMUM AND 0.235 INCHES MAXIMUM IN
thread_class2A A
overall_width3.000 INCHES NOMINAL IN
thread_length0.875 INCHES NOMINAL IN
overall_length6.000 INCHES NOMINAL IN
fastener_length1.980 INCHES MINIMUM AND 2.020 INCHES MAXIMUM IN
special_featuresNEOPRENE, 5.5 IN. (13 CM) DIA; FOR 250 TO 500 ML ROUND BOTTOM FLASKS CM
thread_directionRIGHT-HAND
width_between_flats0.484 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
end_item_identificationNSN 6640013990483, TACTICAL PETROLEUM LABORATORY
NSN5310-00-064-4710
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1006-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.438 INCHES NOMINAL IN
•
THREAD SERIES: UNEF
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.375 INCHES IN
•
NUT HEIGHT: 0.219 INCHES NOMINAL IN
•
SURFACE TREATMENT: NICKEL OVERALL
•
NUT STYLE: HEXAGON
•
THREAD CLASS: 2B
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.438 INCHES NOMINAL IN
THREAD SERIESUNEF
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.375 INCHES IN
NUT HEIGHT0.219 INCHES NOMINAL IN
SURFACE TREATMENTNICKEL OVERALL
NUT STYLEHEXAGON
THREAD CLASS2B
THREAD QUANTITY PER INCH32
MATERIALCOPPER ALLOY OVERALL
SUBSTITUTES & CROSS-REFERENCES 3
124-1961-000Reference document
Same NSN cross-reference
Reference document — Secondary reference
124-1961-00Reference document
Same NSN cross-reference
Reference document — Secondary reference
A8028-0077Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
No demilitarization required
Ready to buy 1006-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1006-1?
1006-1 is a BLADE,BAND SAW,METAL CUTTING. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1006-1?
There are 3 known substitutes for 1006-1: 124-1961-000, 124-1961-00, A8028-0077. Substitute compatibility should be verified for your specific system.
What is the NSN for 1006-1?
1006-1 is cataloged in the U.S. Government catalog under NSN 5310-00-064-4710. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1006-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.