PartsTable
Technical Data Sheet
Download PDF

100599 — ATTENUATOR,FIXED

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

100599: ATTENUATOR,FIXED.

The ATTENUATOR,FIXED is a the manufacturer industrial component. Key specifications include width: 0.125 INCHES NOMINAL IN, length: 0.178 INCHES NOMINAL IN, material: COPPER ALLOY BODY, body_style: RECTANGULAR, TERMINAL/TERMINALS ON OPPOSITE SURFACES, inside_width: 0.222 INCHES NOMINAL IN, power_rating: 0.5 WATTS AVERAGE. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-062-0563, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100599
NSN: 5340-00-062-0563
NIINs: 000620563, 006501862, 011735736, 014194619, 016929249
FSC: 5340 — Hardware, Commercial
CAGE: 79300 — WALTHAM CLOCK CO INC (USA)
SPECIFICATIONS
width0.125 INCHES NOMINAL IN
length0.178 INCHES NOMINAL IN
materialCOPPER ALLOY BODY
body_styleRECTANGULAR, TERMINAL/TERMINALS ON OPPOSITE SURFACES
inside_width0.222 INCHES NOMINAL IN
power_rating0.5 WATTS AVERAGE
hole_diameter0.062 INCHES NOMINAL IN
inside_height0.362 INCHES NOMINAL IN
overall_width0.750 INCHES NOMINAL IN
overall_height0.750 INCHES NOMINAL IN
overall_length3.970 INCHES MINIMUM AND 4.030 INCHES MAXIMUM IN
frequency_range26.500 GIGAHERTZ MINIMUM AND 40.000 GIGAHERTZ MAXIMUM
NSN5340-00-062-0563
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100599 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.178 INCHES NOMINAL IN
•
LOOP/HOLDING DIMENSION: 0.155 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.010 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.140 INCHES NOMINAL IN
•
SURFACE TREATMENT: SILVER OVERALL
•
WIDTH: 0.125 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.178 INCHES NOMINAL IN
LENGTH0.178 INCHES NOMINAL IN
LOOP/HOLDING DIMENSION0.155 INCHES NOMINAL IN
MATERIAL THICKNESS0.010 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.140 INCHES NOMINAL IN
SURFACE TREATMENTSILVER OVERALL
WIDTH0.125 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
HOLE DIAMETER0.062 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — stock exhausted; no further procurementNo demilitarization required
Ready to buy 100599?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100599?
100599 is a ATTENUATOR,FIXED.
What is the NSN for 100599?
100599 is cataloged in the U.S. Government catalog under NSN 5340-00-062-0563. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100599

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.