PartsTable
Technical Data Sheet
Download PDF

10056404 — CLEVIS,ROD END

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10056404: CLEVIS,ROD END.

The CLEVIS,ROD END is a the manufacturer industrial component. Key specifications include material: ALUMINUM ALLOY 6061 OVERALL, end_radius: 0.294 INCHES MINIMUM AND 0.299 INCHES MAXIMUM IN, fork_depth: 1.360 INCHES NOMINAL IN, shank_length: 0.856 INCHES NOMINAL IN, hole_diameter: 0.282 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN, overall_width: 0.640 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-046-0067, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10056404
NSN: 5340-01-046-0067
FSC: 5340 — Hardware, Commercial
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialALUMINUM ALLOY 6061 OVERALL
end_radius0.294 INCHES MINIMUM AND 0.299 INCHES MAXIMUM IN
fork_depth1.360 INCHES NOMINAL IN
shank_length0.856 INCHES NOMINAL IN
hole_diameter0.282 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
overall_width0.640 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
overall_height0.588 INCHES MINIMUM AND 0.598 INCHES MAXIMUM IN
fork_span_width0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
style_designatorCLEVIS
surface_treatmentANODIZE OVERALL
fork_arm_thickness0.168 INCHES NOMINAL IN
securing_pin_hole_diameter0.282 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
NSN5340-01-046-0067
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10056404 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FORK SPAN WIDTH: 0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
•
SECURING PIN HOLE DIAMETER: 0.282 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
•
FORK ARM THICKNESS: 0.168 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-A-8625,TYPE 2,CYED BLACK MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
•
END RADIUS: 0.294 INCHES MINIMUM AND 0.299 INCHES MAXIMUM IN
•
SHANK LENGTH: 0.856 INCHES NOMINAL IN
•
STYLE DESIGNATOR: CLEVIS
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.588 INCHES MINIMUM AND 0.598 INCHES MAXIMUM IN
FORK SPAN WIDTH0.305 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
SECURING PIN HOLE DIAMETER0.282 INCHES MINIMUM AND 0.284 INCHES MAXIMUM IN
FORK ARM THICKNESS0.168 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-A-8625,TYPE 2,CYED BLACK MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
END RADIUS0.294 INCHES MINIMUM AND 0.299 INCHES MAXIMUM IN
SHANK LENGTH0.856 INCHES NOMINAL IN
STYLE DESIGNATORCLEVIS
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-225/8,T651 FED SPEC SINGLE MATERIAL RESPONSE OR QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.640 INCHES MINIMUM AND 0.650 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10056404?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10056404?
10056404 is a CLEVIS,ROD END.
What is the NSN for 10056404?
10056404 is cataloged in the U.S. Government catalog under NSN 5340-01-046-0067. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10056404

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.