PartsTable
Technical Data Sheet
PartsTable / O-RING / 10054916
10054916 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, outside_diameter: 2.756 INCHES NOMINAL IN, center_hole_diameter: 2.540 INCHES MINIMUM AND 2.560 INCHES MAXIMUM IN, elongation_percentage: 160 MAXIMUM, cross-sectional_height: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5331-00-815-8860, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10054916
NSN: 5331-00-815-8860
FSC: 5331 — O-RING
CAGE: A486G — NIMIKKEISTOKESKUS NCB FINLAND (FIN)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating70.0 SHORE DUROMETER A NOMINAL
outside_diameter2.756 INCHES NOMINAL IN
center_hole_diameter2.540 INCHES MINIMUM AND 2.560 INCHES MAXIMUM IN
elongation_percentage160 MAXIMUM
cross-sectional_height0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
NSN5331-00-815-8860
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10054916 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
•
CENTER HOLE DIAMETER: 2.540 INCHES MINIMUM AND 2.560 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 2.756 INCHES NOMINAL IN
•
ELONGATION PERCENTAGE: 160 MAXIMUM
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL HEIGHT0.100 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
CENTER HOLE DIAMETER2.540 INCHES MINIMUM AND 2.560 INCHES MAXIMUM IN
OUTSIDE DIAMETER2.756 INCHES NOMINAL IN
ELONGATION PERCENTAGE160 MAXIMUM
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
AMS7276Interchangeable
interchangeable cross-reference
interchangeable
AS3209-145Interchangeable
interchangeable cross-reference
interchangeable
2-145V1164-75Interchangeable
interchangeable cross-reference
interchangeable
284113-0001ITEM63Interchangeable
interchangeable cross-reference
interchangeable
4400571-1450Interchangeable
interchangeable cross-reference
interchangeable
M83248/1-145Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10054916?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10054916?
10054916 is a O-RING.
What parts can replace 10054916?
There are 18 known substitutes for 10054916: AMS7276, AS3209-145, 2-145V1164-75 and 15 more. Substitute compatibility should be verified for your specific system.
Is 10054916 still available?
10054916 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10054916

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026