PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 1005324
1005324 ✓ Verified by PartsTable
3M · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SEAL,NONMETALLIC SPECIAL SHAPED. Key specifications include construction: SOLID, style_designator: CIRCULAR, aperture_diameter: 3.022 INCHES NOMINAL IN, cross-sectional_height: 0.018 INCHES NOMINAL IN, end_item_identification: ARMED BATTLE TANK; MODEL NO. M1E1,NSN 2350-01-087-1095: AND IMPROVED TANK; MODEL NO.

M11A,NSN 2350-01-136-8738, cross-sectional_thickness: 0.005 INCHES NOMINAL IN. This product is currently in active production with full OEM support. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-043-5481, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1005324
NSN: 5340-01-043-5481
FSC: 5340
CAGE: 95750 — AIRCO REPUBLIC ELECTRONICS, INC. DIV THE AERONAUTICAL INSTRUMENT & RADIO CO (USA)
SPECIFICATIONS
constructionSOLID
style_designatorCIRCULAR
aperture_diameter3.022 INCHES NOMINAL IN
cross-sectional_height0.018 INCHES NOMINAL IN
end_item_identificationARMED BATTLE TANK; MODEL NO. M1E1,NSN 2350-01-087-1095: AND IMPROVED TANK; MODEL NO. M11A,NSN 2350-01-136-8738
cross-sectional_thickness0.005 INCHES NOMINAL IN
cross-sectional_shape_styleSPECIAL
NSN5340-01-043-5481
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1005324 MFR: 3M ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 6.220 INCHES NOMINAL IN
•
DISTANCE FROM END TO HOLE CENTER: 3.110 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEFT INTERNAL AND RIGHT INTERNAL THREADS
•
HOLE QUANTITY PERPENDICULAR TO AXIS: 2
•
CROSS-SECTIONAL SHAPE: SQUARE
•
WIDTH ACROSS FLATS: 0.625 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
LENGTH6.220 INCHES NOMINAL IN
DISTANCE FROM END TO HOLE CENTER3.110 INCHES NOMINAL IN
STYLE DESIGNATORLEFT INTERNAL AND RIGHT INTERNAL THREADS
HOLE QUANTITY PERPENDICULAR TO AXIS2
CROSS-SECTIONAL SHAPESQUARE
WIDTH ACROSS FLATS0.625 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
12321839-2Interchangeable
interchangeable cross-reference
interchangeable
SK10086Interchangeable
interchangeable cross-reference
interchangeable
10086Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1005324?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1005324?
1005324 is a SEAL,NONMETALLIC SPECIAL SHAPED manufactured by 3M.
What parts can replace 1005324?
There are 3 known substitutes for 1005324: 12321839-2, SK10086, 10086. Substitute compatibility should be verified for your specific system.
What is the NSN for 1005324?
1005324 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-043-5481. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1005324

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026