PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10050267-2
10050267-2 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The LATCH,RIM is a the manufacturer industrial component. Key specifications include material: STEEL CASE, bolt_type: REGULAR BEVEL, operation_method: INSIDE TURN KNOB LATCH BOLT, special_features: DESIGNED FOR RH APPL;HOLE DIAMETER:0.193 IN.;HOLE SPACING:1.250 IN.C TO C IN, surface_treatment: CHROMIUM CASE. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-968-4245, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10050267-2
NSN: 5340-00-968-4245
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL CASE
bolt_typeREGULAR BEVEL
operation_methodINSIDE TURN KNOB LATCH BOLT
special_featuresDESIGNED FOR RH APPL;HOLE DIAMETER:0.193 IN.;HOLE SPACING:1.250 IN.C TO C IN
surface_treatmentCHROMIUM CASE
mounting_hole_quantity2
NSN5340-00-968-4245
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10050267-2 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
BOLT TYPE: REGULAR BEVEL
•
MATERIAL: STEEL CASE
•
OPERATION METHOD: INSIDE TURN KNOB LATCH BOLT
•
MOUNTING HOLE QUANTITY: 2
•
SURFACE TREATMENT: CHROMIUM CASE
TECHNICAL CHARACTERISTICS (FLIS)
BOLT TYPEREGULAR BEVEL
SPECIAL FEATURESDESIGNED FOR RH APPL;HOLE DIAMETER:0.193 IN.;HOLE SPACING:1.250 IN.C TO C IN
MATERIALSTEEL CASE
OPERATION METHODINSIDE TURN KNOB LATCH BOLT
MOUNTING HOLE QUANTITY2
SURFACE TREATMENTCHROMIUM CASE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
150 UInterchangeable
interchangeable cross-reference
interchangeable
15021Interchangeable
interchangeable cross-reference
interchangeable
236Interchangeable
interchangeable cross-reference
interchangeable
3380Interchangeable
interchangeable cross-reference
interchangeable
5L380Interchangeable
interchangeable cross-reference
interchangeable
2380Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10050267-2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10050267-2?
10050267-2 is a LATCH,RIM.
What parts can replace 10050267-2?
There are 12 known substitutes for 10050267-2: 150 U, 15021, 236 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10050267-2?
10050267-2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-968-4245. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10050267-2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026