Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The GASKET is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL, head_style: FLAT CHAMFER, head_height: 0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN, thread_length: 0.341 INCHES MINIMUM IN. This product is currently in active production with full OEM support.
This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-475-1765, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
10045066
NSN:5330-00-475-1765 FSC:5330 CAGE:18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
material
STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 316 OVERALL
head_style
FLAT CHAMFER
head_height
0.108 INCHES MINIMUM AND 0.112 INCHES MAXIMUM IN
thread_class
3A A
head_diameter
0.176 INCHES MINIMUM AND 0.183 INCHES MAXIMUM IN
thread_length
0.341 INCHES MINIMUM IN
fastener_length
0.375 INCHES NOMINAL IN
hardness_rating
80.0 ROCKWELL B MINIMUM OVERALL
thread_direction
RIGHT-HAND
surface_treatment
PASSIVATE OVERALL
width_across_flats
0.094 INCHES MINIMUM AND 0.095 INCHES MAXIMUM IN
internal_drive_style
HEXAGON
NSN
5330-00-475-1765
COMPONENT DIAGRAM
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR METAL
•
APERTURE DIAMETER: 2.000 INCHES MINIMUM AND 2.062 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE CORNER RADIUS: 0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
•
MATERIAL: ALUMINUM ALLOY 6061 OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL WIDTH
2.365 INCHES MINIMUM AND 2.385 INCHES MAXIMUM IN
CROSS-SECTIONAL SHAPE STYLE
RECTANGULAR METAL
APERTURE DIAMETER
2.000 INCHES MINIMUM AND 2.062 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION
QQ-A-250/11 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH
1.500 INCHES NOMINAL LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE CORNER RADIUS
0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM IN
MATERIAL
ALUMINUM ALLOY 6061 OVERALL
OVERALL LENGTH
2.365 INCHES MINIMUM AND 2.385 INCHES MAXIMUM IN
SURFACE TREATMENT
CHROMATE OVERALL
HOLE DIAMETER
0.153 INCHES MINIMUM AND 0.159 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10045066?
10045066 is a GASKET.
What parts can replace 10045066?
There are 3 known substitutes for 10045066: 5305PL1370179, 74455244010, 12-Z-1007-3. Substitute compatibility should be verified for your specific system.
What is the NSN for 10045066?
10045066 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-475-1765. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.