PartsTable
Technical Data Sheet
Download PDF

10043673 — SETSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10043673: SETSCREW.

The SETSCREW is a the manufacturer industrial component. Key specifications include material: STEEL COMP 303 OVERALL, head_style: FLAT CHAMFER, head_height: 0.437 INCHES NOMINAL IN, point_style: CONE, point_length: 0.156 INCHES NOMINAL IN, thread_class: 3A A. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-844-5847, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10043673
NSN: 5305-00-844-5847
FSC: 5305 — Screws
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 303 OVERALL
head_styleFLAT CHAMFER
head_height0.437 INCHES NOMINAL IN
point_styleCONE
point_length0.156 INCHES NOMINAL IN
thread_class3A A
head_diameter0.375 INCHES NOMINAL IN
thread_length0.406 INCHES MINIMUM IN
point_diameter0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
fastener_length1.375 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
NSN5305-00-844-5847
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10043673 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
POINT DIAMETER: 0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.437 INCHES NOMINAL IN
•
POINT LENGTH: 0.156 INCHES NOMINAL IN
•
FASTENER LENGTH: 1.375 INCHES NOMINAL IN
•
THREAD LENGTH: 0.406 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
POINT CHAMFER ANGLE: 90.0 DEGREES NOMINAL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
TECHNICAL CHARACTERISTICS
POINT DIAMETER0.125 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
HEAD HEIGHT0.437 INCHES NOMINAL IN
POINT LENGTH0.156 INCHES NOMINAL IN
FASTENER LENGTH1.375 INCHES NOMINAL IN
THREAD LENGTH0.406 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
POINT CHAMFER ANGLE90.0 DEGREES NOMINAL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
209-1032P52Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy 10043673?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10043673?
10043673 is a SETSCREW.
What parts can replace 10043673?
There is 1 known substitute for 10043673: 209-1032P52. Substitute compatibility should be verified for your specific system.
What is the NSN for 10043673?
10043673 is cataloged in the U.S. Government catalog under NSN 5305-00-844-5847. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10043673