PartsTable
Technical Data Sheet
100417 ✓ Verified by PartsTable
· MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,PLASTIC DIELECTR. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, body_width: 0.245 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN, body_height: 0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN, body_length: 0.755 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN, overall_width: 2.312 INCHES NOMINAL IN, overall_length: 2.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-270-0157, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 100417
NSN: 5330-00-270-0157
FSC: 5330
CAGE: 11939 — KIDDE FIRE FIGHTING, INC. DIV NATIONAL FOAM (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
body_width0.245 INCHES MINIMUM AND 0.280 INCHES MAXIMUM IN
body_height0.140 INCHES MINIMUM AND 0.180 INCHES MAXIMUM IN
body_length0.755 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN
overall_width2.312 INCHES NOMINAL IN
overall_length2.500 INCHES NOMINAL IN
special_featuresSTATOR MATERIAL ALUMINUM
aperture_diameter1.812 INCHES NOMINAL IN
features_providedHERMETICALLY SEALED AND MONOLITHIC AND POSITIVE OUTPUTS AND W/ENABLE AND 3-STATE OUTPUT
output_logic_formTRANSISTOR-TRANSISTOR LOGIC
inclosure_materialCERAMIC AND GLASS
storage_temp_range-65.0 TO 150.0 CELSIUS DEGC
NSN5330-00-270-0157
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100417 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
APERTURE DIAMETER: 1.812 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
MATERIAL: RUBBER CHLOROPRENE CLASS CR OVERALL
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
APERTURE DIAMETER1.812 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL LENGTH2.500 INCHES NOMINAL IN
OVERALL WIDTH2.312 INCHES NOMINAL IN
MATERIALRUBBER CHLOROPRENE CLASS CR OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 9
144A9058-2Interchangeable
interchangeable cross-reference
interchangeable
505-A-4Interchangeable
interchangeable cross-reference
interchangeable
160-3653-01-05-00Interchangeable
interchangeable cross-reference
interchangeable
SN74365J-00Interchangeable
interchangeable cross-reference
interchangeable
SN74365AJ-00Interchangeable
interchangeable cross-reference
interchangeable
SN74365JInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100417?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100417?
100417 is a CAPACITOR,FIXED,PLASTIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 100417?
There are 9 known substitutes for 100417: 144A9058-2, 505-A-4, 160-3653-01-05-00 and 6 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100417?
100417 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-270-0157. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100417