PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 100388
100388 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CONTROL ASSEMBLY,PUSH-PULL is a the manufacturer industrial component. Key specifications include general_characteristics_item_description: NO TECH REVIEW OR CHARACTERISTICS DATA. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-128-1233, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100388
NSN: 5330-00-128-1233
FSC: 5330
CAGE: 99832 — SCOTT HUBER ESSICK A CO OF FIGGIE INTERNATIONAL INC (USA)
SPECIFICATIONS
general_characteristics_item_descriptionNO TECH REVIEW OR CHARACTERISTICS DATA
NSN5330-00-128-1233
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100388 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERMEDIATE RING QUANTITY: 3
•
OUTSIDE DIAMETER: 2.500 INCHES NOMINAL IN
•
MATERIAL: RUBBER SYNTHETIC AND COTTON INTERMEDIATE RING
•
CROSS-SECTIONAL SHAPE STYLE: V INTERMEDIATE RING
•
INSIDE DIAMETER: 2.000 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
INTERMEDIATE RING QUANTITY3
OUTSIDE DIAMETER2.500 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC AND COTTON INTERMEDIATE RING
CROSS-SECTIONAL SHAPE STYLEV INTERMEDIATE RING
MATERIALPLASTIC PHENOLIC BOTTOM RING
CROSS-SECTIONAL SHAPE STYLED BOTTOM RING
INSIDE DIAMETER2.000 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLEU TOP RING
MATERIALRUBBER SYNTHETIC AND COTTON TOP RING
HEIGHT0.875 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 6
1FC25Interchangeable
interchangeable cross-reference
interchangeable
100533Interchangeable
interchangeable cross-reference
interchangeable
3005-050-0140Interchangeable
interchangeable cross-reference
interchangeable
100388Interchangeable
interchangeable cross-reference
interchangeable
NAVY 1993 1560Interchangeable
interchangeable cross-reference
interchangeable
LLH402768Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100388?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100388?
100388 is a CONTROL ASSEMBLY,PUSH-PULL.
What parts can replace 100388?
There are 6 known substitutes for 100388: 1FC25, 100533, 3005-050-0140 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100388?
100388 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-128-1233. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100388

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026