PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 100355 PIECE 37 SH 2
100355 PIECE 37 SH 2 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BALL,BEARING is a the manufacturer industrial component. Key specifications include material: STEEL, thread_class: 3A NUT THREAD A, end_item_name: PUMP, thread_length: 0.343 INCHES MINIMUM STUD THREAD IN, overall_length: 0.843 INCHES NOMINAL IN, end_item_source: 11671. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-294-8408, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100355 PIECE 37 SH 2
NSN: 3110-01-294-8408
FSC: 3110
CAGE: 45225 — BOSCH AUTOMOTIVE SERVICE SOLUTIONS INC. (USA)
SPECIFICATIONS
materialSTEEL
thread_class3A NUT THREAD A
end_item_namePUMP
thread_length0.343 INCHES MINIMUM STUD THREAD IN
overall_length0.843 INCHES NOMINAL IN
end_item_source11671
thread_directionRIGHT-HAND NUT THREAD
component_quantity47
nominal_thread_size0.190 INCHES STUD THREAD IN
thread_pitch_diameters+0.1645 TO 0.1654 INCHES STUD THREAD IN
end_item_identificationMODEL PUMP NPT-20 SERIES
thread_quantity_per_inch32 NUT THREAD
NSN3110-01-294-8408
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 100355 PIECE 37 SH 2 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
X5008/12/156 ITEM 95Interchangeable
interchangeable cross-reference
interchangeable
P80440-3Interchangeable
interchangeable cross-reference
interchangeable
156/95Interchangeable
interchangeable cross-reference
interchangeable
15695Interchangeable
interchangeable cross-reference
interchangeable
84760Interchangeable
interchangeable cross-reference
interchangeable
0015695Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100355 PIECE 37 SH 2?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100355 PIECE 37 SH 2?
100355 PIECE 37 SH 2 is a BALL,BEARING.
What parts can replace 100355 PIECE 37 SH 2?
There are 7 known substitutes for 100355 PIECE 37 SH 2: X5008/12/156 ITEM 95, P80440-3, 156/95 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100355 PIECE 37 SH 2?
100355 PIECE 37 SH 2 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-01-294-8408. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100355 PIECE 37 SH 2

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026