10031-7 — NETWORK

✓ Government record, cited

Hama · MRO · MRO_GENERAL

PRODUCT OVERVIEW

10031-7: NETWORK.

- Natural wooden frame. - High-quality washed glass. - Precision mitre.

- With hanger. Key specifications include diameter: 0.170 INCHES NOMINAL IN, material: PLASTIC BAND, overall_width: 0.375 INCHES NOMINAL IN, style_designator: SINGLE LOOP, material_thickness: 0.050 INCHES NOMINAL IN, loop_inside_diameter: 0.520 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-003-6667, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ 10031-7

NSN: 5340-00-003-6667
NIINs: 000036667, 010685984, 017328489
FSC: 5340 — Hardware, Commercial
CAGE: 12909 — CARDION INC (USA)

SPECIFICATIONS

diameter	0.170 INCHES NOMINAL IN
material	PLASTIC BAND
overall_width	0.375 INCHES NOMINAL IN
style_designator	SINGLE LOOP
material_thickness	0.050 INCHES NOMINAL IN
loop_inside_diameter	0.520 INCHES NOMINAL IN
distance_from_loop_center_to_tongue_end	0.750 INCHES NOMINAL IN
reference_number_differentiating_characteristics	AS DIFFERENTIATED BY PACKING IN ACCORDANCE WITH MIL-P-23199 AND MATERIAL MUSTCONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS
center_to_center_distance_between_loop_and_mounting_hole	0.562 INCHES NOMINAL IN
NSN	5340-00-003-6667

COMPONENT DIAGRAM

KEY FEATURES

•

STYLE DESIGNATOR: SINGLE LOOP

•

DIAMETER: 0.170 INCHES NOMINAL IN

•

MATERIAL THICKNESS: 0.050 INCHES NOMINAL IN

•

DISTANCE FROM LOOP CENTER TO TONGUE END: 0.750 INCHES NOMINAL IN

•

CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE: 0.562 INCHES NOMINAL IN

•

MATERIAL: PLASTIC BAND

•

LOOP INSIDE DIAMETER: 0.520 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

STYLE DESIGNATOR	SINGLE LOOP
DIAMETER	0.170 INCHES NOMINAL IN
OVERALL WIDTH	0.375 INCHES NOMINAL IN
MATERIAL THICKNESS	0.050 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO TONGUE END	0.750 INCHES NOMINAL IN
CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE	0.562 INCHES NOMINAL IN
MATERIAL	PLASTIC BAND
LOOP INSIDE DIAMETER	0.520 INCHES NOMINAL IN
REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS	AS DIFFERENTIATED BY PACKING IN ACCORDANCE WITH MIL-P-23199 AND MATERIAL MUSTCONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS

SUBSTITUTES & CROSS-REFERENCES 6

HP8NReference document

Same NSN cross-reference

Reference document — Design control — primary reference

99024233Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

672B452P7Reference document

Same NSN cross-reference

Reference document — Vendor item drawing reference

900129-07Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

1981489-8Reference document

Same NSN cross-reference

Reference document — Advisory reference — outside the item-of-supply concept

SMB583238-7Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy 10031-7?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is 10031-7?

10031-7 is a NETWORK manufactured by Hama. It is classified as a MRO (MRO_GENERAL).

What parts can replace 10031-7?

There are 6 known substitutes for 10031-7: HP8N, 99024233, 672B452P7 and 3 more. Substitute compatibility should be verified for your specific system.

What is the NSN for 10031-7?

10031-7 is cataloged in the U.S. Government catalog under NSN 5340-00-003-6667. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

10031-7 — NETWORK

Request a Quote — 10031-7