PartsTable
Technical Data Sheet
Download PDF

10030081 — MODIFICATION KIT,VEHICULAR EQUIP

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10030081: MODIFICATION KIT,VEHICULAR EQUIP.

MODIFICATION KIT,VEHICULAR EQUIP. Key specifications include width: 1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN, length: 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN, material: COPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL, hole_diameter: 0.093 INCHES NOMINAL IN, overall_height: 0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN, surface_treatment: CADMIUM AND CHROMATE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-536-6608, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10030081
NSN: 5340-00-536-6608
NIINs: 005366608, 016072890
FSC: 5340 — Hardware, Commercial
CAGE: 99378 — ATLEE OF DELAWARE, INCORPORATED (USA)
SPECIFICATIONS
width1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
length0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
materialCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
hole_diameter0.093 INCHES NOMINAL IN
overall_height0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.016 INCHES NOMINAL IN
loop/holding_dimension0.370 INCHES MINIMUM AND 0.420 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
material_document_and_classificationQQ-C-533 MIL SPEC ALL MATERIAL RESPONSES OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-00-536-6608
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10030081 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-C-533 MIL SPEC ALL MATERIAL RESPONSES OVERALL
•
LOOP/HOLDING DIMENSION: 0.370 INCHES MINIMUM AND 0.420 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM AND CHROMATE OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.480 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
LENGTH0.430 INCHES MINIMUM AND 0.450 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-C-533 MIL SPEC ALL MATERIAL RESPONSES OVERALL
LOOP/HOLDING DIMENSION0.370 INCHES MINIMUM AND 0.420 INCHES MAXIMUM IN
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.270 INCHES MINIMUM AND 0.290 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH1.115 INCHES MINIMUM AND 1.135 INCHES MAXIMUM IN
MATERIALCOPPER ALLOY 170 OR COPPER ALLOY 172 OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10030081?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10030081?
10030081 is a MODIFICATION KIT,VEHICULAR EQUIP.
What is the NSN for 10030081?
10030081 is cataloged in the U.S. Government catalog under NSN 5340-00-536-6608. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10030081

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.