PartsTable
Technical Data Sheet
Download PDF

1002414 — CONNECTOR,RECEPTACLE,ELECTRICAL

✓ Government record, cited
3M · ORING SEAL
PRODUCT OVERVIEW

1002414: CONNECTOR,RECEPTACLE,ELECTRICAL.

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include width: 0.187 INCHES NOMINAL IN, length: 0.345 INCHES NOMINAL IN, material: COPPER ALLOY BODY, seat_angle: 45.0 DEGREES ALL ENDS, thread_class: 2A ALL ENDS A, hole_diameter: 0.071 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-136-2757, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1002414
NSN: 5340-00-136-2757
NIINs: 001362757, 010273586, 014702392
FSC: 5340 — Hardware, Commercial
CAGE: 08280 — ATOCON CO (USA)
SPECIFICATIONS
width0.187 INCHES NOMINAL IN
length0.345 INCHES NOMINAL IN
materialCOPPER ALLOY BODY
seat_angle45.0 DEGREES ALL ENDS
thread_class2A ALL ENDS A
hole_diameter0.071 INCHES NOMINAL IN
overall_height0.415 INCHES NOMINAL IN
overall_length44.4 MILLIMETERS NOMINAL MM
shell_materialPLASTIC
connection_typeTHREADED EXTERNAL TUBE ALL ENDS
connection_styleFLARED (TUBE) ALL ENDS
style_designatorCROSS
NSN5340-00-136-2757
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1002414 MFR: 3M ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.345 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.285 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.016 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.227 INCHES NOMINAL IN
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.415 INCHES NOMINAL IN
LENGTH0.345 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAISI ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.285 INCHES NOMINAL IN
MATERIAL THICKNESS0.016 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.227 INCHES NOMINAL IN
SPECIAL FEATURES0.100 IN. H TAB EXTENDING UPWARD FROM OUTSIDE OF BASE IN
SURFACE TREATMENTCADMIUM OVERALL
WIDTH0.187 INCHES NOMINAL IN
MATERIALSTEEL COMP 1065 OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy 1002414?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1002414?
1002414 is a CONNECTOR,RECEPTACLE,ELECTRICAL manufactured by 3M.
What is the NSN for 1002414?
1002414 is cataloged in the U.S. Government catalog under NSN 5340-00-136-2757. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1002414

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.