PartsTable
Technical Data Sheet
100231 ✓ Verified by PartsTable
· MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: PLASTIC, body_style: W/O MTG FACILITIES, TERMINAL(S) ON ONE END, reset_type: MANUAL, body_length: 3.125 INCHES NOMINAL IN, model_number: 775K-M3 RV, usage_design: REPLACEMENT INDICATOR FOR CALL BELL SYSTEMS. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-079-9447, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO MRO_GENERAL 100231
NSN: 5330-00-079-9447
FSC: 5330
CAGE: 05283 — SHEFFER CORP (USA)
SPECIFICATIONS
materialPLASTIC
body_styleW/O MTG FACILITIES, TERMINAL(S) ON ONE END
reset_typeMANUAL
body_length3.125 INCHES NOMINAL IN
model_number775K-M3 RV
usage_designREPLACEMENT INDICATOR FOR CALL BELL SYSTEMS
body_diameter1.375 INCHES NOMINAL IN
overall_width8.010 INCHES NOMINAL IN
overall_height1.938 INCHES NOMINAL IN
overall_length3.250 INCHES NOMINAL IN
frequency_rating60.0 HERTZ NOMINAL
special_featuresALIGATOR CLIPS TO SOLAR CONNECTOR
NSN5330-00-079-9447
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100231 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
SPECIAL FEATURESCROSS-SECTIONAL SHAPE STYLE:116 IRREGULAR SHAPE FROM OLD FIIG A03200
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
C1122Interchangeable
interchangeable cross-reference
interchangeable
100231Interchangeable
interchangeable cross-reference
interchangeable
500-3030-02Interchangeable
interchangeable cross-reference
interchangeable
9000S6504-73992REV0PC1Interchangeable
interchangeable cross-reference
interchangeable
137322Interchangeable
interchangeable cross-reference
interchangeable
1018940Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100231?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100231?
100231 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 100231?
There are 13 known substitutes for 100231: C1122, 100231, 500-3030-02 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100231?
100231 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-079-9447. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100231