PartsTable
Technical Data Sheet
Download PDF

10022591 — FRAME SECTION,STRUCTURAL,VEHICUL

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

10022591: FRAME SECTION,STRUCTURAL,VEHICUL.

FRAME SECTION,STRUCTURAL,VEHICUL. Key specifications include width: 0.994 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN, length: 0.059 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN, material: STEEL COMP 1065 OVERALL, hole_diameter: 0.093 INCHES NOMINAL IN, overall_height: 0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN, mounting_method: UNTHREADED HOLE(S). This part is cataloged in the U.S.

Government catalog under NSN 5340-01-064-3680, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10022591
NSN: 5340-01-064-3680
NIINs: 010643680, 015897785
FSC: 5340 — Hardware, Commercial
CAGE: 99378 — ATLEE OF DELAWARE, INCORPORATED (USA)
SPECIFICATIONS
width0.994 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
length0.059 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN
materialSTEEL COMP 1065 OVERALL
hole_diameter0.093 INCHES NOMINAL IN
overall_height0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
mounting_methodUNTHREADED HOLE(S)
surface_treatmentCADMIUM AND CHROMATE OVERALL
material_thickness0.022 INCHES NOMINAL IN
loop/holding_dimension0.518 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
distance_from_loop_center_to_end0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
NSN5340-01-064-3680
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10022591 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LENGTH: 0.059 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
LOOP/HOLDING DIMENSION: 0.518 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
•
MATERIAL THICKNESS: 0.022 INCHES NOMINAL IN
•
DISTANCE FROM LOOP CENTER TO END: 0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.680 INCHES MINIMUM AND 0.700 INCHES MAXIMUM IN
LENGTH0.059 INCHES MINIMUM AND 0.061 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
MOUNTING METHODUNTHREADED HOLE(S)
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL
LOOP/HOLDING DIMENSION0.518 INCHES MINIMUM AND 0.625 INCHES MAXIMUM IN
MATERIAL THICKNESS0.022 INCHES NOMINAL IN
DISTANCE FROM LOOP CENTER TO END0.390 INCHES MINIMUM AND 0.410 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM AND CHROMATE OVERALL
WIDTH0.994 INCHES MINIMUM AND 1.016 INCHES MAXIMUM IN
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10022591?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10022591?
10022591 is a FRAME SECTION,STRUCTURAL,VEHICUL.
What is the NSN for 10022591?
10022591 is cataloged in the U.S. Government catalog under NSN 5340-01-064-3680. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10022591

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.