PartsTable
Technical Data Sheet
Download PDF

1002-401 — ADAPTER,FITTING,LUBRICATION

✓ Government record, cited
3M · MRO · MRO_GENERAL
PRODUCT OVERVIEW

1002-401: ADAPTER,FITTING,LUBRICATION.

The ADAPTER,FITTING,LUBRICATION is a 3M industrial component. Key specifications include aperture_width: 7.075 INCHES NOMINAL IN, aperture_length: 2.070 INCHES NOMINAL IN, style_designator: OVAL, bearing_surface_width: 0.250 INCHES NOMINAL IN, end_item_identification: 2355-01-532-2174, JOINT EOD RAPID RESPONSE VEHICLE (JERRV), part_name_assigned_by_controlling_agency: FITTING, ADAP. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-455-2635, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1002-401
NSN: 5305-00-455-2635
NIINs: 004552635, 013154337, 013348129, 014224849, 015531420, 015616956
FSC: 5305 — Screws
CAGE: 82423 — KLEINSCHMIDT INC (USA)
SPECIFICATIONS
aperture_width7.075 INCHES NOMINAL IN
aperture_length2.070 INCHES NOMINAL IN
style_designatorOVAL
bearing_surface_width0.250 INCHES NOMINAL IN
end_item_identification2355-01-532-2174, JOINT EOD RAPID RESPONSE VEHICLE (JERRV)
part_name_assigned_by_controlling_agencyFITTING, ADAP
NSN5305-00-455-2635
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 1002-401 · 3M ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.156 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.190 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
THREAD LENGTH: 0.438 INCHES NOMINAL IN
•
HARDNESS RATING: 41.5 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A403 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FILLISTER
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.156 INCHES NOMINAL IN
HEAD HEIGHT0.190 INCHES NOMINAL IN
FASTENER LENGTH0.500 INCHES NOMINAL IN
THREAD LENGTH0.438 INCHES NOMINAL IN
HARDNESS RATING41.5 ROCKWELL C MINIMUM AND 43.0 ROCKWELL C MAXIMUM OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A403 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLEHEXAGON
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1002-401?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1002-401?
1002-401 is a ADAPTER,FITTING,LUBRICATION manufactured by 3M. It is classified as a MRO (MRO_GENERAL).
What is the NSN for 1002-401?
1002-401 is cataloged in the U.S. Government catalog under NSN 5305-00-455-2635. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1002-401

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.