PartsTable
Technical Data Sheet
Download PDF

1002-0008-001CP — WASHER,FLAT

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

1002-0008-001CP: WASHER,FLAT.

The WASHER,FLAT is a the manufacturer industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL, hole_diameter: 0.280 INCHES NOMINAL IN, overall_diameter: 0.500 INCHES NOMINAL IN, peripheral_shape_style: ROUND, center_hole_shape_style: ROUND, end_item_identification: VALVE ANL .50IPS. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-317-3507, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1002-0008-001CP
NSN: 5310-01-317-3507
FSC: 5310 — Nuts and Washers
CAGE: 04577 — MISSION SYSTEMS ORCHARD PARK INC (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
hole_diameter0.280 INCHES NOMINAL IN
overall_diameter0.500 INCHES NOMINAL IN
peripheral_shape_styleROUND
center_hole_shape_styleROUND
end_item_identificationVALVE ANL .50IPS
cross-sectional_shape_styleRECTANGULAR
NSN5310-01-317-3507
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1002-0008-001CP · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
OVERALL DIAMETER: 0.500 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: RECTANGULAR
•
PERIPHERAL SHAPE STYLE: ROUND
•
MATERIAL: PLASTIC POLYTETRAFLUOROETHYLENE OVERALL
•
CENTER HOLE SHAPE STYLE: ROUND
•
HOLE DIAMETER: 0.280 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
OVERALL DIAMETER0.500 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLERECTANGULAR
PERIPHERAL SHAPE STYLEROUND
END ITEM IDENTIFICATIONVALVE ANL .50IPS
MATERIALPLASTIC POLYTETRAFLUOROETHYLENE OVERALL
CENTER HOLE SHAPE STYLEROUND
HOLE DIAMETER0.280 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 3
1002-0008-001Reference document
Same NSN cross-reference
Reference document — Secondary reference
1970002-20-2114 ITEM 11CPReference document
Same NSN cross-reference
Reference document — Secondary reference
1970002-20-2114 ITEM 11Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1002-0008-001CP?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1002-0008-001CP?
1002-0008-001CP is a WASHER,FLAT.
What parts can replace 1002-0008-001CP?
There are 3 known substitutes for 1002-0008-001CP: 1002-0008-001, 1970002-20-2114 ITEM 11CP, 1970002-20-2114 ITEM 11. Substitute compatibility should be verified for your specific system.
What is the NSN for 1002-0008-001CP?
1002-0008-001CP is cataloged in the U.S. Government catalog under NSN 5310-01-317-3507. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1002-0008-001CP