PartsTable
Technical Data Sheet
PartsTable / MRO / 1001795
1001795 ✓ Verified by PartsTable
3M · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Full open or full close only — never throttle Rising stem shows position visually
Throttling a gate valve erodes seats
PRODUCT OVERVIEW

The RESISTOR,FIXED,COMPOSITION is a 3M industrial component. Key specifications include material: PLASTIC POLYTETRAFLUOROETHYLENE PACKING, body_length: 0.460 INCHES NOMINAL IN, bonnet_type: INSIDE SCREW, body_diameter: 0.225 INCHES NOMINAL IN, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-052-4651, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1001795
NSN: 4820-00-052-4651
FSC: 4820
CAGE: 00365 — TLD ACE CORP DIV TLD ACE (USA)
SPECIFICATIONS
materialPLASTIC POLYTETRAFLUOROETHYLENE PACKING
body_length0.460 INCHES NOMINAL IN
bonnet_typeINSIDE SCREW
body_diameter0.225 INCHES NOMINAL IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
connection_stylePLAIN,OPTIONAL END(PIPE) ALL ENDS
special_featuresABOVE KNEE; BLACK, WHITE OR HISPANIC SKIN TONE; MAY BE AFFIXED TO CPR-1700 SERIES MANIKIN
style_designatorAXIAL TERMINAL EACH END
thread_directionRIGHT-HAND ALL ENDS
operating_pressure400.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SECOND RESPONSE LBS
nominal_thread_size1.250 INCHES ALL ENDS IN
NSN4820-00-052-4651
COMPONENT DIAGRAM
GATE VALVE — FULL OPEN OR FULL CLOSE ONLY Rising STEM BONNET FLOW → → FLOW SEATS — — SIZE: — · — · — PN: 1001795 · 3M ⚠ VERIFY BEFORE ORDERING Gate valves = FULL OPEN or FULL CLOSE only — never throttle. Partial opening causes seat erosion and vibration. ✓ BROKER TIP Rising stem shows valve position visually — easier maintenance. Non-rising stem saves headroom. PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: STRAIGHT THRU
•
MATERIAL: COPPER ALLOY BODY
•
MEDIA FOR WHICH DESIGNED: STEAM FIRST RESPONSE
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM B-584 ALLOY 845 ASSN STD SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE
•
SUPPLEMENTARY FEATURES: THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 12168, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984
•
NOMINAL THREAD SIZE: 1.250 INCHES ALL ENDS IN
•
OPERATING PRESSURE: 125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM FIRST RESPONSE LBS
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORSTRAIGHT THRU
MATERIALCOPPER ALLOY BODY
MEDIA FOR WHICH DESIGNEDSTEAM FIRST RESPONSE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B-584 ALLOY 845 ASSN STD SINGLE MATERIAL RESPONSE FLOW CONTROL DEVICE
MATERIAL DOCUMENT AND CLASSIFICATIONASTM B-584 ALLOY 845 ASSN STD SINGLE MATERIAL RESPONSE BODY
SUPPLEMENTARY FEATURESTHIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 12168, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984
NOMINAL THREAD SIZE1.250 INCHES ALL ENDS IN
OPERATING PRESSURE125.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM FIRST RESPONSE LBS
OPERATING PRESSURE400.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SECOND RESPONSE LBS
MATERIALCOPPER ALLOY FLOW CONTROL DEVICE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 23
WW-V-35Interchangeable
interchangeable cross-reference
interchangeable
70-101-01Interchangeable
interchangeable cross-reference
interchangeable
MSS SP-110Interchangeable
interchangeable cross-reference
interchangeable
B6000 3/8INInterchangeable
interchangeable cross-reference
interchangeable
D11TT3-8Interchangeable
interchangeable cross-reference
interchangeable
MSS-SP110 3/8 FIG1AInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 1001795?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1001795?
1001795 is a RESISTOR,FIXED,COMPOSITION manufactured by 3M. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1001795?
There are 23 known substitutes for 1001795: WW-V-35, 70-101-01, MSS SP-110 and 20 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1001795?
1001795 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4820-00-052-4651. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1001795

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026