PartsTable
Technical Data Sheet
Download PDF

1001657 — SOLDER,LEAD-TIN ALLOY

✓ Government record, cited
3M · ORING SEAL
PRODUCT OVERVIEW

1001657: SOLDER,LEAD-TIN ALLOY.

The SOLDER,LEAD-TIN ALLOY is a 3M industrial component. Key specifications include material: RUBBER SOLE, fastening_method: SLIDE FASTENER, special_features: SN63/PB37 1.27MM, 1.0KG/SPOOL KG, part_name_assigned_by_controlling_agency: ALPHA TELECORE PLUS CORED WIRE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-533-3337, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
1001657
NSN: 5340-01-533-3337
NIINs: 015333337, 015913599, 016570693, 016693327
FSC: 5340 — Hardware, Commercial
CAGE: 92878 — HDT EXPEDITIONARY SYSTEMS INC (USA)
SPECIFICATIONS
materialRUBBER SOLE
fastening_methodSLIDE FASTENER
special_featuresSN63/PB37 1.27MM, 1.0KG/SPOOL KG
part_name_assigned_by_controlling_agencyALPHA TELECORE PLUS CORED WIRE
NSN5340-01-533-3337
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 1001657 MFR: 3M ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 1
2001232 REV T ITEM 56Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1001657?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1001657?
1001657 is a SOLDER,LEAD-TIN ALLOY manufactured by 3M.
What parts can replace 1001657?
There is 1 known substitute for 1001657: 2001232 REV T ITEM 56. Substitute compatibility should be verified for your specific system.
What is the NSN for 1001657?
1001657 is cataloged in the U.S. Government catalog under NSN 5340-01-533-3337. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1001657