PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10015859-006
10015859-006 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The PLUNGER,QUICK RELEASE is a the manufacturer industrial component. Key specifications include shape: ROUND, thread_length: 0.531 INCHES NOMINAL IN, overall_length: 0.594 INCHES NOMINAL IN, end_pressure_rating: 1.000 POUNDS NOMINAL LBS, nominal_thread_size: 0.183 INCHES IN, thread_quantity_per_inch: 32. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-688-0110, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10015859-006
NSN: 5340-00-688-0110
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
shapeROUND
thread_length0.531 INCHES NOMINAL IN
overall_length0.594 INCHES NOMINAL IN
end_pressure_rating1.000 POUNDS NOMINAL LBS
nominal_thread_size0.183 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5340-00-688-0110
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10015859-006 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
•
NOMINAL THREAD SIZE: 0.183 INCHES IN
•
END PRESSURE RATING: 1.000 POUNDS NOMINAL LBS
•
THREAD QUANTITY PER INCH: 32
•
THREAD LENGTH: 0.531 INCHES NOMINAL IN
•
SHAPE: ROUND
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL LENGTH0.594 INCHES NOMINAL IN
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
NOMINAL THREAD SIZE0.183 INCHES IN
END PRESSURE RATING1.000 POUNDS NOMINAL LBS
THREAD QUANTITY PER INCH32
THREAD LENGTH0.531 INCHES NOMINAL IN
SHAPEROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
49Interchangeable
interchangeable cross-reference
interchangeable
A232883Interchangeable
interchangeable cross-reference
interchangeable
S-49Interchangeable
interchangeable cross-reference
interchangeable
5839Interchangeable
interchangeable cross-reference
interchangeable
LT1108-03M1Interchangeable
interchangeable cross-reference
interchangeable
CB57-44001PC49Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10015859-006?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10015859-006?
10015859-006 is a PLUNGER,QUICK RELEASE.
What parts can replace 10015859-006?
There are 13 known substitutes for 10015859-006: 49, A232883, S-49 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10015859-006?
10015859-006 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-688-0110. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10015859-006

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026