PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10015529-002
10015529-002 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The CLAMP,LOOP is a the manufacturer industrial component. Key specifications include material: STEEL COMP 1020 BAND, overall_width: 1.250 INCHES NOMINAL IN, surface_treatment: ZINC AND CHROMATE BAND, material_thickness: 0.062 INCHES NOMINAL IN, loop_inside_diameter: 0.375 INCHES NOMINAL IN, material_document_and_classification: SAE ASSN STD SINGLE MATERIAL RESPONSE BAND. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-890-0009, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10015529-002
NSN: 5340-00-890-0009
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL COMP 1020 BAND
overall_width1.250 INCHES NOMINAL IN
surface_treatmentZINC AND CHROMATE BAND
material_thickness0.062 INCHES NOMINAL IN
loop_inside_diameter0.375 INCHES NOMINAL IN
material_document_and_classificationSAE ASSN STD SINGLE MATERIAL RESPONSE BAND
NSN5340-00-890-0009
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10015529-002 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOOP INSIDE DIAMETER: 0.375 INCHES NOMINAL IN
•
SURFACE TREATMENT: ZINC AND CHROMATE BAND
•
MATERIAL DOCUMENT AND CLASSIFICATION: SAE ASSN STD SINGLE MATERIAL RESPONSE BAND
•
MATERIAL THICKNESS: 0.062 INCHES NOMINAL IN
•
MATERIAL: STEEL COMP 1020 BAND
TECHNICAL CHARACTERISTICS (FLIS)
LOOP INSIDE DIAMETER0.375 INCHES NOMINAL IN
SURFACE TREATMENTZINC AND CHROMATE BAND
OVERALL WIDTH1.250 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONSAE ASSN STD SINGLE MATERIAL RESPONSE BAND
MATERIAL THICKNESS0.062 INCHES NOMINAL IN
MATERIALSTEEL COMP 1020 BAND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
M1-25Interchangeable
interchangeable cross-reference
interchangeable
P20.25Interchangeable
interchangeable cross-reference
interchangeable
P2025Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10015529-002?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10015529-002?
10015529-002 is a CLAMP,LOOP.
What parts can replace 10015529-002?
There are 3 known substitutes for 10015529-002: M1-25, P20.25, P2025. Substitute compatibility should be verified for your specific system.
Is 10015529-002 still available?
10015529-002 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10015529-002

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026