PartsTable
Technical Data Sheet
PartsTable / MRO / 10013-4

10013-4 — Technical Data Sheet

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CAPACITOR,FIXED,CERAMIC DIELECTR. Key specifications include material: IRON BODY, duty_type: CONTINUOUS, body_style: W/O MTG FACILITIES, RADIAL TERMINALS, bore_shape: STRAIGHT, head_style: HEXAGON, body_length: 0.156 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System under NSN 3110-00-472-2692, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 10013-4
NSN: 3110-00-472-2692
FSC: 3110
CAGE: 50027 — UNDERSEA SENSOR SYSTEMS INC DIV ULTRA SONOBUOY SYSTEMS (USA)
SPECIFICATIONS
materialIRON BODY
duty_typeCONTINUOUS
body_styleW/O MTG FACILITIES, RADIAL TERMINALS
bore_shapeSTRAIGHT
head_styleHEXAGON
body_length0.156 INCHES MAXIMUM IN
head_height0.226 INCHES MINIMUM AND 0.243 INCHES MAXIMUM IN
flange_width0.0420 INCHES NOMINAL IN
thread_class2A SINGLE MOUNTING FACILITY A
body_diameter0.437 INCHES MAXIMUM IN
bore_diameter0.1875 INCHES NOMINAL IN
coil_quantity1
NSN3110-00-472-2692
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10013-4 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LOAD DIRECTION: RADIAL
•
INTERNAL CLEARANCE: 0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
RETAINER FABRICATION METHOD: PRESSED
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS
LOAD DIRECTIONRADIAL
SPECIAL FEATURESTORQUE TESTED
INTERNAL CLEARANCE0.0008 INCHES MINIMUM RADIAL AND 0.0011 INCHES MAXIMUM RADIAL IN
SURFACE FINISHGROUND
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
OVERALL WIDTH0.1960 INCHES NOMINAL IN
RETAINER FABRICATION METHODPRESSED
FLANGE WIDTH0.0420 INCHES NOMINAL IN
BORE SHAPESTRAIGHT
VERIFIED SUBSTITUTES & CROSS-REFERENCES 13
179839InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
29N800PC33InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
N9353PC17InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
503GCR050ZInterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
100134-01InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
GR835RW4InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVEGOVERNMENT REGISTRY
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10013-4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10013-4?
10013-4 is a CAPACITOR,FIXED,CERAMIC DIELECTR. It is classified as a MRO (MRO_GENERAL).
What parts can replace 10013-4?
There are 13 known substitutes for 10013-4: 179839, 29N800PC33, N9353PC17 and 10 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 10013-4?
10013-4 is cataloged in the Federal Logistics Information System under NSN 3110-00-472-2692. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10013-4

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026