PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10012814
10012814 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The PLATE,RETAINING,BEARING is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, outside_diameter: 2.360 INCHES MINIMUM AND 2.380 INCHES MAXIMUM IN, aperture_diameter: 1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN, countersink_angle: 100.0 DEGREES NOMINAL, surface_treatment: CADMIUM OVERALL, countersink_diameter: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-696-3611, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10012814
NSN: 3110-00-696-3611
FSC: 3110
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialSTEEL OVERALL
outside_diameter2.360 INCHES MINIMUM AND 2.380 INCHES MAXIMUM IN
aperture_diameter1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN
countersink_angle100.0 DEGREES NOMINAL
surface_treatmentCADMIUM OVERALL
countersink_diameter0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
mounting_hole_diameter0.146 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
bolt_circle_hole_quantity6
mounting_bolt_circle_diameter1.916 INCHES MINIMUM AND 1.926 INCHES MAXIMUM IN
mounting_hole_arrangement_styleSINGLE BOLT HOLE CIRCLE
NSN3110-00-696-3611
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: 10012814 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MOUNTING HOLE DIAMETER: 0.146 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
•
SURFACE TREATMENT: CADMIUM OVERALL
•
MATERIAL: STEEL OVERALL
•
MOUNTING HOLE ARRANGEMENT STYLE: SINGLE BOLT HOLE CIRCLE
•
OUTSIDE DIAMETER: 2.360 INCHES MINIMUM AND 2.380 INCHES MAXIMUM IN
•
COUNTERSINK DIAMETER: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
•
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
•
APERTURE DIAMETER: 1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS (FLIS)
MOUNTING HOLE DIAMETER0.146 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
SURFACE TREATMENTCADMIUM OVERALL
MATERIALSTEEL OVERALL
MOUNTING HOLE ARRANGEMENT STYLESINGLE BOLT HOLE CIRCLE
OUTSIDE DIAMETER2.360 INCHES MINIMUM AND 2.380 INCHES MAXIMUM IN
COUNTERSINK DIAMETER0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
APERTURE DIAMETER1.380 INCHES MINIMUM AND 1.400 INCHES MAXIMUM IN
BOLT CIRCLE HOLE QUANTITY6
MOUNTING BOLT CIRCLE DIAMETER1.916 INCHES MINIMUM AND 1.926 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
9969Interchangeable
interchangeable cross-reference
interchangeable
48322Interchangeable
interchangeable cross-reference
interchangeable
44-100-0-5AMPInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10012814?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10012814?
10012814 is a PLATE,RETAINING,BEARING.
What parts can replace 10012814?
There are 3 known substitutes for 10012814: 9969, 48322, 44-100-0-5AMP. Substitute compatibility should be verified for your specific system.
What is the NSN for 10012814?
10012814 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-696-3611. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10012814

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026