PartsTable
Technical Data Sheet
Download PDF

1001-8 — INSERT CABINET,MEDICAL INSTRUMEN

✓ Government record, cited
Esselte · MRO · MRO_GENERAL
PRODUCT OVERVIEW

1001-8: INSERT CABINET,MEDICAL INSTRUMEN.

INSERT CABINET,MEDICAL INSTRUMEN. Key specifications include material: STEEL OVERALL, end_style: SPRING END,SQUARED AND GROUND BOTH ENDS, load_rating: 7.700 POUNDS MAXIMUM LBS, coil_quantity: 9.500, inside_diameter: 0.363 INCHES NOMINAL IN, style_designator: CYLINDRICAL. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-053-7808, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1001-8
NSN: 5310-00-053-7808
NIINs: 000537808, 000623133, 001476700, 001548793, 001558668, 001899308, 002919624, 003529270, 004562053, 005706002, 006441822, 006521829, 006631548, 007755267, 009086681, 009111559, 010254672, 010501930, 010652877, 010808977, 010976616, 011722279, 011775386, 011801054, 012748694, 012904478, 013947594, 013973062, 014219460, 014483989, 014970047, 015423654, 016568344, 016710994
FSC: 5310 — Nuts and Washers
CAGE: 13841 — TIFFIN PARTS, L.L.C. DIV SUBSIDIARY OF PETTIBONE CORP. (USA)
SPECIFICATIONS
materialSTEEL OVERALL
end_styleSPRING END,SQUARED AND GROUND BOTH ENDS
load_rating7.700 POUNDS MAXIMUM LBS
coil_quantity9.500
inside_diameter0.363 INCHES NOMINAL IN
style_designatorCYLINDRICAL
spring_free_length1.500 INCHES NOMINAL IN
spring_solid_length0.470 INCHES NOMINAL IN
spring_deflection_rate12.000 POUNDS PER INCH NOMINAL LBS
end_item_identificationF-35 AIRCRAFT SUPPORT EQUIPMENT
spring_free_outside_diameter0.453 INCHES NOMINAL IN
part_name_assigned_by_controlling_agencyCOMPRESSION SPRING
NSN5310-00-053-7808
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 1001-8 · Esselte ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
SUBSTITUTES & CROSS-REFERENCES 8
43812Reference document
Same NSN cross-reference
Reference document — Secondary reference
37892Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
530709Reference document
Same NSN cross-reference
Reference document — Secondary reference
11A7062Reference document
Same NSN cross-reference
Reference document — Secondary reference
293359Reference document
Same NSN cross-reference
Reference document — Secondary reference
5110371HSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy 1001-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1001-8?
1001-8 is a INSERT CABINET,MEDICAL INSTRUMEN manufactured by Esselte. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1001-8?
There are 8 known substitutes for 1001-8: 43812, 37892, 530709 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 1001-8?
1001-8 is cataloged in the U.S. Government catalog under NSN 5310-00-053-7808. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1001-8