PartsTable
Technical Data Sheet
Download PDF

10008936 — BOLT,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

10008936: BOLT,MACHINE.

The BOLT,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON EXTENDED WASHER, head_height: 0.259 INCHES MINIMUM AND 0.289 INCHES MAXIMUM IN, thread_class: 2A A, thread_length: 0.800 INCHES MINIMUM IN, fastener_length: 0.930 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-148-6765, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10008936
NSN: 5306-01-148-6765
FSC: 5306 — Bolts
CAGE: 7X677 — GENERAL MOTORS LLC DBA GENERAL MOTORS LLC (USA)
SPECIFICATIONS
head_styleHEXAGON EXTENDED WASHER
head_height0.259 INCHES MINIMUM AND 0.289 INCHES MAXIMUM IN
thread_class2A A
thread_length0.800 INCHES MINIMUM IN
fastener_length0.930 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
width_between_flats0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
nominal_thread_diameter0.312 INCHES IN
extended_washer_diameter0.686 INCHES MINIMUM AND 0.706 INCHES MAXIMUM IN
minimum_tensile_strength125000 POUNDS PER SQUARE INCH LBS
thread_quantity_per_inch18
thread_series_designatorUNIFIED NATIONAL COARSE (UNC)
NSN5306-01-148-6765
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: 10008936 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
EXTENDED WASHER THICKNESS: 0.071 INCHES NOMINAL IN
•
HEAD HEIGHT: 0.259 INCHES MINIMUM AND 0.289 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.930 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN
•
EXTENDED WASHER DIAMETER: 0.686 INCHES MINIMUM AND 0.706 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.800 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.312 INCHES IN
•
HEAD STYLE: HEXAGON EXTENDED WASHER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
EXTENDED WASHER THICKNESS0.071 INCHES NOMINAL IN
HEAD HEIGHT0.259 INCHES MINIMUM AND 0.289 INCHES MAXIMUM IN
FASTENER LENGTH0.930 INCHES MINIMUM AND 0.960 INCHES MAXIMUM IN
EXTENDED WASHER DIAMETER0.686 INCHES MINIMUM AND 0.706 INCHES MAXIMUM IN
THREAD LENGTH0.800 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.312 INCHES IN
HEAD STYLEHEXAGON EXTENDED WASHER
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.489 INCHES MINIMUM AND 0.500 INCHES MAXIMUM IN
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH LBS
SUBSTITUTES & CROSS-REFERENCES 1
384951Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 10008936?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10008936?
10008936 is a BOLT,MACHINE.
What parts can replace 10008936?
There is 1 known substitute for 10008936: 384951. Substitute compatibility should be verified for your specific system.
What is the NSN for 10008936?
10008936 is cataloged in the U.S. Government catalog under NSN 5306-01-148-6765. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10008936

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.