PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 100080-02
100080-02 ✓ Verified by PartsTable
— · NUT WASHER
WHAT YOU NEED TO KNOW
Match nut grade to bolt grade for full strength Lock nuts prevent loosening under vibration
Don't mix grades — weakens the joint
PRODUCT OVERVIEW

The LEAD,STORAGE BATTERY is a the manufacturer cache protection component designed to preserve data integrity during power loss events in enterprise server and storage controller environments. Key specifications include material: STEEL BODY, body_type: SOLID, head_type: SOLID, nut_style: FLOATINGFLOATING, grip_length: 1.500 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN, thread_class: 2B2B. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-849-7492, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100080-02
NSN: 5315-00-849-7492
FSC: 5315
CAGE: 92110 — SERVO CORPORATION OF AMERICA (USA)
SPECIFICATIONS
materialSTEEL BODY
body_typeSOLID
head_typeSOLID
nut_styleFLOATINGFLOATING
grip_length1.500 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
thread_class2B2B
head_diameter0.360 INCHES MINIMUM AND 0.390 INCHES MAXIMUM IN
overall_width0.690 INCHES NOMINAL0.690 INCHES NOMINAL IN
thread_seriesUNIFIED NATIONAL COARSE (UNC)UNIFIED NATIONAL COARSE (UNC)
actuation_typePULL AND PUSH
shank_diameter0.245 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
detent_quantity2
NSN5315-00-849-7492
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: 100080-02 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
STYLE DESIGNATOR: RING HANDLE
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SHANK
•
SURFACE TREATMENT: PASSIVATE SHANK
•
MATERIAL: STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304L OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 SHANK
•
GRIP LENGTH: 1.500 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
•
SHANK DIAMETER: 0.245 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
•
SHOULDER TO HEAD END DISTANCE: 0.380 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
•
RING HANDLE DIAMETER: 1.000 INCHES MINIMUM AND 1.187 INCHES MAXIMUM IN
TYPICAL APPLICATIONS
  • RAID cache protection during power loss events
  • Write-back cache enablement for storage controllers
  • Enterprise server data integrity assurance
  • Hot-swap battery/capacitor replacement in production
TECHNICAL CHARACTERISTICS (FLIS)
STYLE DESIGNATORRING HANDLE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SHANK
SURFACE TREATMENTPASSIVATE SHANK
MATERIALSTEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 303SE OR STEEL COMP 304L OR STEEL COMP 304 OR STEEL COMP 305 OR STEEL COMP 309 OR STEEL COMP 310 OR STEEL COMP 316 OR STEEL COMP 316L OR STEEL COMP 317 OR STEEL COMP 321 OR STEEL COMP 347 SHANK
GRIP LENGTH1.500 INCHES MINIMUM AND 1.520 INCHES MAXIMUM IN
SHANK DIAMETER0.245 INCHES MINIMUM AND 0.248 INCHES MAXIMUM IN
SHOULDER TO HEAD END DISTANCE0.380 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
RING HANDLE DIAMETER1.000 INCHES MINIMUM AND 1.187 INCHES MAXIMUM IN
ACTUATION TYPEPULL AND PUSH
DETENT QUANTITY2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 8
10008002Interchangeable
interchangeable cross-reference
interchangeable
1494253Interchangeable
interchangeable cross-reference
interchangeable
1494250Interchangeable
interchangeable cross-reference
interchangeable
444618Interchangeable
interchangeable cross-reference
interchangeable
81A5029A0343Interchangeable
interchangeable cross-reference
interchangeable
M45952-1-4-15Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 100080-02?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100080-02?
100080-02 is a LEAD,STORAGE BATTERY.
What parts can replace 100080-02?
There are 8 known substitutes for 100080-02: 10008002, 1494253, 1494250 and 5 more. Substitute compatibility should be verified for your specific system.
What is the NSN for 100080-02?
100080-02 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5315-00-849-7492. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100080-02

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026