PartsTable
Technical Data Sheet
PartsTable / COMPONENT / 10006337
10006337 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The BUMPER is a the manufacturer industrial component. Key specifications include material: RUBBER SYNTHETIC, shank_length: 0.500 INCHES NOMINAL IN, overall_height: 0.875 INCHES NOMINAL IN, shank_diameter: 0.625 INCHES NOMINAL IN, style_designator: FLANGED, outside/top_flange_diameter: 0.813 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-951-9774, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
10006337
NSN: 5340-00-951-9774
FSC: 5340
CAGE: 18876 — US ARMY AVIATION AND MISSILE COMMAND (USA)
SPECIFICATIONS
materialRUBBER SYNTHETIC
shank_length0.500 INCHES NOMINAL IN
overall_height0.875 INCHES NOMINAL IN
shank_diameter0.625 INCHES NOMINAL IN
style_designatorFLANGED
outside/top_flange_diameter0.813 INCHES NOMINAL IN
NSN5340-00-951-9774
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 10006337 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL: RUBBER SYNTHETIC
•
SHANK LENGTH: 0.500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: FLANGED
•
SHANK DIAMETER: 0.625 INCHES NOMINAL IN
•
OUTSIDE/TOP FLANGE DIAMETER: 0.813 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
OVERALL HEIGHT0.875 INCHES NOMINAL IN
MATERIALRUBBER SYNTHETIC
SHANK LENGTH0.500 INCHES NOMINAL IN
STYLE DESIGNATORFLANGED
SHANK DIAMETER0.625 INCHES NOMINAL IN
OUTSIDE/TOP FLANGE DIAMETER0.813 INCHES NOMINAL IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 2
MILC52078Upgraded Successor
successor cross-reference
successor
210Upgraded Successor
successor cross-reference
successor
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy 10006337?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 10006337?
10006337 is a BUMPER.
What parts can replace 10006337?
There are 2 known substitutes for 10006337: MILC52078, 210. Substitute compatibility should be verified for your specific system.
What is the NSN for 10006337?
10006337 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-00-951-9774. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 10006337

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026