PartsTable
Technical Data Sheet
Download PDF

1000585 — WELDING POWDER,METALLIC OVERLAY

✓ Government record, cited
3M · MRO · MRO_GENERAL
PRODUCT OVERVIEW

1000585: WELDING POWDER,METALLIC OVERLAY.

WELDING POWDER,METALLIC OVERLAY. Key specifications include material: ALUMINUM BASIC, content_within_each_unit_package: 5.0LBS LBS. This part is cataloged in the U.S.

Government catalog under NSN 5999-01-040-1121, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ 1000585
NSN: 5999-01-040-1121
NIINs: 010401121, 013158802, 014790956
FSC: 5999 — Miscellaneous Electrical and Electronic Components
CAGE: 25154 — DATA-DESIGN LABORATORIES CORP (USA)
SPECIFICATIONS
materialALUMINUM BASIC
special_featuresNSN IS USED TO PURCHASE A MINIMUM OF 60 CONTAINERS AND UP;AL 12SI,SPHEROIDAL,GAS ATOMIZED;-45 UM (-325 MESH);CERTIFICATION PWA 1355;SUITABLE FOR VPS/LPPS,MAY ALSO BE USED FOR APS
content_within_each_unit_package5.0LBS LBS
NSN5999-01-040-1121
COMPONENT DIAGRAM
CONN A SFF-8482 CONN B SFF-8087 LENGTH: SAS CABLE ASSEMBLY | SFF-8482 to SFF-8087 Cable length: | SAS | Shielded TITLE CABLE ASSY PN 1000585 MFR 3M WELDING POWDER,METALLIC OVERLAY
KEY FEATURES
•
ENVIRONMENTAL PROTECTION MATERIAL LOCATION: THROUGHOUT RF SHIELDING GASKET
•
CROSS-SECTIONAL THICKNESS: 0.030 INCHES NOMINAL IN
•
INSIDE CORNER RADIUS: 0.010 INCHES NOMINAL IN
•
SMALLEST BOLT HOLE DIAMETER: 0.125 INCHES NOMINAL IN
•
APERTURE WIDTH: 0.512 INCHES NOMINAL IN
•
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH: 0.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
ENVIRONMENTAL PROTECTION MATERIAL LOCATIONTHROUGHOUT RF SHIELDING GASKET
CROSS-SECTIONAL THICKNESS0.030 INCHES NOMINAL IN
INSIDE CORNER RADIUS0.010 INCHES NOMINAL IN
OVERALL LENGTH2.500 INCHES NOMINAL IN
SMALLEST BOLT HOLE DIAMETER0.125 INCHES NOMINAL IN
OVERALL WIDTH1.750 INCHES NOMINAL IN
APERTURE WIDTH0.512 INCHES NOMINAL IN
OUTSIDE CORNER BEVEL LENGTH ALONG WIDTH0.250 INCHES NOMINAL IN
APERTURE LENGTH1.137 INCHES NOMINAL IN
OUTSIDE CORNER BEVEL LENGTH ALONG LENGTH0.250 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 1
08-0301-3170Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 1000585?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 1000585?
1000585 is a WELDING POWDER,METALLIC OVERLAY manufactured by 3M. It is classified as a MRO (MRO_GENERAL).
What parts can replace 1000585?
There is 1 known substitute for 1000585: 08-0301-3170. Substitute compatibility should be verified for your specific system.
What is the NSN for 1000585?
1000585 is cataloged in the U.S. Government catalog under NSN 5999-01-040-1121. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 1000585

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.