PartsTable
Technical Data Sheet
Download PDF

100056B ITEM 13 — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

100056B ITEM 13: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR, hardness_rating: 70.0 SHORE DUROMETER A NOMINAL, center_hole_diameter: 4.320 INCHES MINIMUM AND 4.380 INCHES MAXIMUM IN, cross-sectional_height: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN, end_item_identification: CYLINDER, JIB. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-559-3284, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
100056B ITEM 13
NSN: 5331-01-559-3284
FSC: 5331 — O-ring
CAGE: 63899 — JARP INDUSTRIES, INC. DBA JARP INDUSTRIES INC (USA)
SPECIFICATIONS
materialRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
hardness_rating70.0 SHORE DUROMETER A NOMINAL
center_hole_diameter4.320 INCHES MINIMUM AND 4.380 INCHES MAXIMUM IN
cross-sectional_height0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
end_item_identificationCYLINDER, JIB
NSN5331-01-559-3284
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: 100056B ITEM 13 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL HEIGHT: 0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
•
HARDNESS RATING: 70.0 SHORE DUROMETER A NOMINAL
•
CENTER HOLE DIAMETER: 4.320 INCHES MINIMUM AND 4.380 INCHES MAXIMUM IN
•
MATERIAL: RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL HEIGHT0.205 INCHES MINIMUM AND 0.215 INCHES MAXIMUM IN
HARDNESS RATING70.0 SHORE DUROMETER A NOMINAL
CENTER HOLE DIAMETER4.320 INCHES MINIMUM AND 4.380 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONCYLINDER, JIB
MATERIALRUBBER BUTADIENE-ACRYLONITRILE CLASS NBR
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 1
703348AReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy 100056B ITEM 13?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is 100056B ITEM 13?
100056B ITEM 13 is a O-RING.
What parts can replace 100056B ITEM 13?
There is 1 known substitute for 100056B ITEM 13: 703348A. Substitute compatibility should be verified for your specific system.
What is the NSN for 100056B ITEM 13?
100056B ITEM 13 is cataloged in the U.S. Government catalog under NSN 5331-01-559-3284. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — 100056B ITEM 13